Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > General > Help - Gear Selector cable |
|
|
Rommel Member Since: 20 Aug 2017 Location: Sandhurst Berkshire Posts: 625 |
On fleabay possibly same as evoque
|
||
6th Dec 2023 1:38 pm |
|
Nodge68 Member Since: 15 Jul 2020 Location: Newquay Posts: 2071 |
I can't see how replacing a cable is a 3 or 4 hour job.
|
||
6th Dec 2023 6:57 pm |
|
RichardM Member Since: 07 Jul 2015 Location: Cardiff Posts: 72 |
When mine went it was a long job and the mechanic said he never wanted to do it again.
|
||
6th Dec 2023 9:47 pm |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 4937 |
what does the JLR manual say? Jules |
||
6th Dec 2023 11:15 pm |
|
sid Member Since: 16 Jul 2015 Location: devon Posts: 490 |
it might be worth looking on amazon at the universal repair kit ,im sure you could adapat some thing,or even make one yourself.the rac carry a horseshoe type clip that ive used on all sorts of linkages.ecp carry a kit but im not sure what its like,you could go there and look at one. |
||
7th Dec 2023 8:38 pm |
|
JJDukeSenior Member Since: 06 Dec 2023 Location: Bournemouth Posts: 2 |
Thanks, that part does appear to be the same. Great to have the option.
|
||
8th Dec 2023 2:49 pm |
|
deadbeatdad Member Since: 10 Oct 2022 Location: Scotland Posts: 90 |
i have the same issue with mine, i have tried to make a clip with two M5 bolts but i found it a struggle to feed the clip through and then try to get the bolts in. So im back to a couple of cable ties atthe minute |
||
27th Aug 2024 9:09 pm |
|
deadbeatdad Member Since: 10 Oct 2022 Location: Scotland Posts: 90 |
This is mine when i managed to get the fitting turned around to see what it was like inside
|
||||||
29th Aug 2024 5:22 pm |
|
deadbeatdad Member Since: 10 Oct 2022 Location: Scotland Posts: 90 |
would this be an easier cheaper fix
|
||
30th Aug 2024 7:31 pm |
|
deadbeatdad Member Since: 10 Oct 2022 Location: Scotland Posts: 90 |
I ordered that part and it seems to be the correct size only thing is I can't figure out how to get the old centre piece out to fit the new one. Anybody any idea how to get that centre piece out? |
||
10th Sep 2024 1:12 pm |
|
deadbeatdad Member Since: 10 Oct 2022 Location: Scotland Posts: 90 |
anybody dismantled these gear linkages? |
||
11th Sep 2024 4:59 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis