After clumsily knocking my interior mirror off can someone advise me on how to refit it ?

I just cant get enough pressure on the mirror shaft (I've removed the plastic surround) to enable the three sided metal 'spring' to clip over the bolt head secured to the windscreen. Even a dollop of fairy liquid hasn't helped to ease it on.

I've been trying for hours now with no luck, so please, can anyone help  cheers,
Superspoons
2009 FL2 TD4 HSE Stornaway Grey

OK, will reply to my own thread as i worked it out but may help others...

The trick is to twist it on anti-clockwise.

I removed the plastic cover but left the connector plug in place . Offer up the casting to the windscreen bolt at about "1 o'clock" and then press it very firmly whilst twisting the casting anti-clockwise whereby it should clip onto the bolt and stay in place. Replace the two halves of the plastic covering and job done.

Easy when you know how  cheers,
Superspoons
2009 FL2 TD4 HSE Stornaway Grey

Well done superspoons,
one of those threads that's bound to come in handy for someone in the future.
Dave DAVE.
I.A.M. F1rst Driver.
Gone 2003 Discovery TD5 Auto,
Gone 1986 Defender 90 Station Wagon
Gone 1984 Range Rover 3.5 Vogue Manual.
Gone 1970 Series 11A/3 SWB 3.5 V8 Hybrid
Gone 1964 Series 11A LWB Van
Gone 1966 Series 11A SWB Van
Gone 1964 Series 11A LWB Station Wagon,