Got a Mantec front plate and a tank guard to fit and just waiting on some instructions from Mantec in coming through.

Reason for needing instructions is not for what appears to be the more dificult tank guard, it's for the front plate.

I can work out the tank guard when under there, but when I took the tow eye cover off and offered up the front plate [apart from the spats] I don't know if I need to remove the plastic surround of the tow eye cover.
Don't want to strip or damage bits unnecessarily so will await the instructions being posted from Mantec.

Will post up a few pics when I get around to fitting.

Click image to enlarge

I have fitted both these items and no great shakes. With regard the plastic cover around the front tow eye this needs to be removed to give easy access to the tow eye if required after fitting. Otherwise reduces the access with plastic cover still in situ. Following the Mantec guide / FITTING INSTRUCTIONS for my MY14 SD4 there was an anomaly, the handbrake cables did not interfere with fitting so I did not use the supplied brackets regarding these. Front skid plate takes 15 minutes, Tank guard, on my own, took 45minutes. Mine have been on the car for 6 months with no problems and has given me peace of mind when off road.

When I fitted my front guard:

Just remove the eye cover
Remove the bolts (4 I recall) holding the existing protection in.place.
( existing plate stays on the car)
Fit mantec skid plate over existing plate
Attach with the longer mantec bolts
I used some bricks to support the mantec whilst bolting in place
10 minutes ish 

Thanks chaps

So on the front plate it's just the small tow eye cover to remove & the outer frame stays in situ......?
And that would mean the top leading edge of that frame is covered by the plate ?

I will also have to remove the front spats as they fouled the plate when I offered it up for a look.

Mantec instructions not turned up in today's post.

ronp wrote:

Will post up a few pics when I get around to fitting.

Fitted the front plate a few months ago, but just got around to fitting the tank guard today.

Tank guard ... it's amazing when under there just how low slung and vulnerable the plastic fuel tank is

Click image to enlarge

Front plate, with the tank guard in view.

Click image to enlarge

Will feel much more confident now when it's off road.  FL2 now gone and have a couple of items left for sale:-

Brodit active iPhone holder + Brodit dash clip,
Bluetooth Music Streaming Module.

Oportunity for an orange ascent strip on the front plate forward lip!!!!  MY15
Tyre Pressure Monitoring System (TPMS)
Surround Camera System
InControl Apps soon to be replaced with CarPlay (WIP)
Meridian Premium Surround Sound
Digital Audio Broadcast
Timed Climate
Cruise ECO Data
Follow Me Home Reverse
Extra Features Menu
Picture In Motion
4x4i screen (WIP)
Digital Broadcast TV
Meridian Rear Media with WIFI
Factory Powered Tailgate
Blind Spot Monitoring (BSM)
Reverse Cross Traffic Alert (RCTA)
Electrochromatic Wing Mirrors (WIP)

Look out for the fuel consumption....
At the amount of dirt will accumulate in that guard/"tray", for sure the consumption will go up !...
Just kidding...

Had already thought of that Alex, but it does lower the centre of gravity and it means I can now chuck it through corners at warp speeds and as it also smooths out the airflow underneath, that'll add another 25mph to my top speed .

@ Stuart, thanks for the idea, but no thank you.  FL2 now gone and have a couple of items left for sale:-

Brodit active iPhone holder + Brodit dash clip,
Bluetooth Music Streaming Module.

 MY15
Tyre Pressure Monitoring System (TPMS)
Surround Camera System
InControl Apps soon to be replaced with CarPlay (WIP)
Meridian Premium Surround Sound
Digital Audio Broadcast
Timed Climate
Cruise ECO Data
Follow Me Home Reverse
Extra Features Menu
Picture In Motion
4x4i screen (WIP)
Digital Broadcast TV
Meridian Rear Media with WIFI
Factory Powered Tailgate
Blind Spot Monitoring (BSM)
Reverse Cross Traffic Alert (RCTA)
Electrochromatic Wing Mirrors (WIP)

Not that you would want to but maybe some LED lights could be fitted either side of the front tow point


Dan Freelander 57 plate XS Blue Auto

Don't forget to let your insurance company know

I've currently taken my tank guard off - having been round the Bala 4x4 site I seem to have bent the plate slightly, so it now catches the exhaust under start/stop, so just need to straighten it... 2000 Xei 1.8 gone
2004 HSE Td4 Auto, MT's, sump guard, sliderz - gone
2014 GS Man - AT's, Mantec Sump guard and tank guard, split charger in boot, towbar, work in progress...

does a few drops a day of 2 stroke oil make sump guards stronger? At work
At home

"I can't always believe facts I read on the web" - Charles Dickens

winner by default of the tractor vs caravan race

You should fit an access hatch so that you can easily check it for leaks

Did you hear about the Land Rover that didn't leak oil

JLR took it back to the factory until it did  MY14 Kahn Converted Dynamic - Fuji White Ebony/Pimento Interior
MY15 Xenon Headlight Conversion

MY17 RRS SVR - Estoril Blue Cirrus/Ebony 🪣💺’s

Last edited by LR NUT on 29th Jun 2015 10:02 am. Edited 1 time in total

They stop leaking when empty
Touch wood never had a drip from mine, must be empty  2008 xs
Snorkel
raised axle/gearbox breathers
Mantec tank guard
Cb radio
Blanked EGR
Sump guard
Scratches
Snolkle