As some of you maybe aware, generally whenever I'm doing some of the more simple bits 'n bobs on my Freelander 2, I try my best to document them on camera. I will never call them tutorials as the information contained within them might not be perfect. I'd probably more refer to them as guides . From someone who often refers to a screw as a bolt and vice-versa, some of the videos have actually turned out to have been quite helpful to people, who knew ay...

I thought I'd put this thread together to list some of the jobs that both Alana and myself have done on our Freelander 2 in case it helps anyone else out there. Or for an easy to reference back to thread should anyone want post a video in any future threads that might popup.

Replacing the turbo actuator and exercising the turbo vanes:


Link:

Wow !
Thanks Jules

When I was putting this thread together, I also thought wow because I thought it was only going to be a few videos that we had done about the Freelander 2 . I've been on this forum for long enough to know that you guys do an epic job of helping as many people as you can on this forum . So hopefully, by putting these videos into a thread of their own, it might make it a bit easier for you guys to link to any useful videos . https://www.youtube.com/@scottandalana4x4
https://www.facebook.com/ScottandAlana4x4

Extreme helpful thank you for taking the time and effort to do it

Well done
Thank you FL2 SD4 XS 2013 Orkney Grey

These are excellent. Thank you for taking the time.

You are all very welcome! As an almost side note, one of the videos above I split up and put onto our other channel in case people prefer to share the individual parts of the video:

Don't buy cheap fuel filters:


Link:

I've got a thread running over here for this video: https://www.freel2.com/forum/post449816.html Maybe it'll help with anyone else that hasn't taken the rear bumper and wheel arch linings off of their Freelander 2 before .



Link: