Hi folks,

can the jlr SDD or some other scanner can do a "live test" on the PCM, like move the EGR valve or Turbo actuator? My Foxwell scanner can't do that, and i'm wondering if it's scanner related or just not supported by the PCM?

My local specialist reset the Turbo Actuator parameters on the 2008 car with Autologic equipment

Thank you for the answer. My scanner can do a "new xy installed" reset on most components. But what i mean is driving the actuators open / closed on demand.
Like "open the EGR valve" "close the EGR valve" and so on...

Yes, I understand, I assumed that Autologic does that function, as I was told the angle of opening and closing, so assumed that this was a live function. I originally looked this up also on the manufactures website to check part number interchangeability.

Maybe it was just a "live data" from the position feedback of the actuator?

I mixed up the terms. What i'm locking for is "Aktive test". I hoped some of the SDD folks can answer that. So, again:

Can SDD perform "Aktive test" on PCM (for example open the EGR valve) on pre facelift models (2008)?