Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Maintenance & Modifications > Wing Mirror Light
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Kyle



Member Since: 14 Sep 2023
Location: Lancashire
Posts: 4

United Kingdom 
Wing Mirror Light

Hi all, tried to upgrade my wing mirror light to LEDs, fitted them both and working fine until the left hand one went off. Tried the old bulbs which were working fine and none will work in the left hand mirror. Everything else is fine on the other mirror and all the other lights. Any ideas what I've broken or how to fix it?

Post #435683 14th Sep 2023 7:43 pm
View user's profile Send private message View poster's gallery Reply with quote
SYFL2



Member Since: 16 Jun 2012
Location: Sheffield
Posts: 2551

2007 Freelander 2 TD4 HSE Auto Stornoway Grey

Have you checked for a blown fuse ?

Post #435685 14th Sep 2023 8:27 pm
View user's profile Send private message View poster's gallery Reply with quote
Kyle



Member Since: 14 Sep 2023
Location: Lancashire
Posts: 4

United Kingdom 

From what I can work out, the fuse would be the one for all the interior lights and that seems to be fine.

Post #435686 14th Sep 2023 8:39 pm
View user's profile Send private message View poster's gallery Reply with quote
Nodge68



Member Since: 15 Jul 2020
Location: Newquay
Posts: 1846

United Kingdom 2009 Freelander 2 TD4 SE Manual Rimini Red

The door lighting is handled by the door control module, which are fused in the rear fuse box.
You'll need to test for power at the door mirror bulb holder. If it's dead, and the rest of the door electrical equipment is working, then it'll be the wiring or door module.
LEDs can do odd things to the output MOSFETs, so I avoid LEDs where normal bulbs were originally fitted. 2009 Rimini Red SE TD4. Soon to be sold.
Hyundai Ioniq 5 Ultimate on order.
Gone. 2006 Tonga Green i6 HSE.

Post #435687 14th Sep 2023 8:56 pm
View user's profile Send private message View poster's gallery Reply with quote
Kyle



Member Since: 14 Sep 2023
Location: Lancashire
Posts: 4

United Kingdom 

Turns out the passenger door module fuse is behind my glove box (I guess I have 2013 not 2012 as I had thought), checked the fuse though and it's good so I suppose I'm borrowing (or buying) a volt meter from somebody. Everything else is fine. Will investigate more tomorrow in the daylight. Really appreciate the help though, thank you. I'll keep posting when I figure it out.

Post #435688 14th Sep 2023 9:28 pm
View user's profile Send private message View poster's gallery Reply with quote
Kyle



Member Since: 14 Sep 2023
Location: Lancashire
Posts: 4

United Kingdom 

Managed to get the light working, after a better look at the connector, it has a little bit of corrosion which I didn't think was too bad but gave it the best clean I could with vinegar and blast with compressed air and after a few wiggles around, I got it to light up. Not convinced it's fixed but we will see how long it lasts. Guessing it's either corroded terminals or possibly a loose wire inside the bulb holder. How simple is this to replace? Snip the wires, connect a new one and all good or is that just wishful thinking?

Thanks for the advice though.

Post #435712 15th Sep 2023 7:33 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site