Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > General > Non starter, help....
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
silvermachine



Member Since: 11 May 2016
Location: staffordshire
Posts: 16

United Kingdom 2013 Freelander 2 SD4 HSE Auto Orkney Grey
Non starter, help....

On Tuesday evening on my commute home, my car started to lose power, stutter and cut out.
I got help to push it out of the way, and called green flag.
The only code was P006a, after that nothing.
Couldn't start the car, it just turned over and spluttered ran at less than 1000 revs and cut out.
Tow truck home, and now it is on the drive.
I have tried a new map sensor, crank position sensor and maf sensor.
I need it fixed asap, so does anyone know of a decent mobile mechanic in the stourbridge kinver area.?

Post #435164 24th Aug 2023 6:38 pm
View user's profile Send private message View poster's gallery Reply with quote
jules



Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 4482

United Kingdom 2014 Freelander 2 SD4 SE Auto Firenze Red

my list of codes says :

P006A Manifold absolute pressure - mass or volume air flow correlation

Also:
https://www.obd-codes.com/p006a

Sorry cant help with a local mechanic though Jules

Post #435180 25th Aug 2023 7:07 am
View user's profile Send private message View poster's gallery Reply with quote
Chrism551



Member Since: 01 Feb 2021
Location: Blackpool
Posts: 135

2012 Freelander 2 SD4 XS Auto Santorini Black

Surely with that code it would run in default condition. Sound more fuel related, bad fuel or filter, worst case pump. How much fuel are you showing in the tank?

Post #435187 25th Aug 2023 8:16 am
View user's profile Send private message View poster's gallery Reply with quote
silvermachine



Member Since: 11 May 2016
Location: staffordshire
Posts: 16

United Kingdom 2013 Freelander 2 SD4 HSE Auto Orkney Grey

1/ 2 tank, and thats my next investigation, I have just got a new filter to try.
I changedvthe crank sensor first then the MAP sensor and maf sensor, but it definatly soinds and feels like fuel problem.
Chugging when tryongbto startvand very rough runs for a few seconds at very low revs and stalls after about 10 seconds.
No smoke or backfire.
So i will test for fuel flow first.

Post #435210 25th Aug 2023 4:11 pm
View user's profile Send private message View poster's gallery Reply with quote
Chrism551



Member Since: 01 Feb 2021
Location: Blackpool
Posts: 135

2012 Freelander 2 SD4 XS Auto Santorini Black

Might be worth checking the in tank pump is working and the wiring to the tank senders, a common problem.. Being a saddle shaped tank the pump keeps both halves fuel level using the internal senders. I don’t know the full ins and outs of it but I understand that the gauge can show fuel but one half can be empty and the sender in that half prevents the engine from running to protect the hp fuel pump from low fuel level damage. Rough idea of how it works ( ish). Hopefully some more experienced owners will add to this / correct me. Keep us updated.

Post #435216 25th Aug 2023 6:06 pm
View user's profile Send private message View poster's gallery Reply with quote
Rommel



Member Since: 20 Aug 2017
Location: Sandhurst Berkshire
Posts: 480

England 2013 Freelander 2 TD4 XS Manual Fuji White

Has it got a genuine JLR fuel filter? non original filters can cause this problem. if the transfer pump is working you should hear it when ignition is turned on. 2013 FL2 XS.
Defender 90 300 TDi.
Defender 90 300 TDi CSW.
1964 MGB Roadster.
1944 Willys MB "Jeep" with bullet holes. (gone)
17 hand Irish Drought Thoroughbred (mostly lame)
Nagging Old Boiler.

Post #435217 25th Aug 2023 6:15 pm
View user's profile Send private message View poster's gallery Reply with quote
gasman



Member Since: 02 May 2013
Location: Tyneside
Posts: 850

United Kingdom 2009 Freelander 2 TD4_e GS Manual Zermatt Silver

Not necessarily the sensor. The sensor is telling you there is an air flow or air pressure problem. Now at the point when I learn something new something old is lost out the other side !
Now retired so it doesn't matter anymore.

Post #435225 25th Aug 2023 9:21 pm
View user's profile Send private message View poster's gallery Reply with quote
Nodge68



Member Since: 15 Jul 2020
Location: Newquay
Posts: 1702

United Kingdom 2009 Freelander 2 TD4 SE Manual Rimini Red

I'd be putting the MAF and MAP sensors back in as they're working, and couldn't measure a correlation error if they were faulty. Additionally new sensors on the air path need calibration using SDD, or the engine won't run at optimum performance.

Look for air leaks in the intake trunking between the MAF and MAP, including all the boost hoses. 2009 Rimini Red SE TD4. My daily driver.
Gone. 2006 Tonga Green i6 HSE.

Post #435227 25th Aug 2023 10:00 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site