Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com
Home > Technical > Part number - SD4 High Pressure Fuel Pump
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
ozjeff62



Member Since: 28 May 2018
Location: Sydney, NSW
Posts: 494
Australia 2011 Freelander 2 SD4 SE Auto Ipanema Sand
Part number - SD4 High Pressure Fuel Pump

As in the subject, does anyone know the part number, or how I can photograph the PN on my pump?

Trying to sort my fuel pressure issue. The same old P0087 DTC hits me once a week or so, and it is always at an inconvenient moment.


Cheers MY11 SD4 SE Auto
Post #431906 20th Apr 2023 1:57 pm
View user's profile Send private message View poster's gallery Reply with quote
jules



Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 4584
United Kingdom 2014 Freelander 2 SD4 SE Auto Firenze Red

https://www.advancedfactors.co.uk/dw12-fue...1217-c.asp

LR047217


Looks like there is only one pump for all DW12 engines Jules
Post #431907 20th Apr 2023 2:39 pm
View user's profile Send private message View poster's gallery Reply with quote
ozjeff62



Member Since: 28 May 2018
Location: Sydney, NSW
Posts: 494
Australia 2011 Freelander 2 SD4 SE Auto Ipanema Sand

Thanks Jules.

The LR part number helps a lot - each manuf has their own part number, but the OEM one is great.

I kept bumping into two Bosch numbers - one is 0445010139. The other is 0 986 437 034 - maybe specific to SD4?
Maybe one is the injector pump, the other being the lift pump?
Now to see if it's actually the sensor or something else going on.

Love it.

Hope this thread is helpful in the future too. MY11 SD4 SE Auto
Post #431963 22nd Apr 2023 11:14 am
View user's profile Send private message View poster's gallery Reply with quote
BossBob



Member Since: 30 Sep 2010
Location: Bristol
Posts: 1260
England 2007 Freelander 2 TD4 GS Manual Baltic Blue

My understanding is that the high pressure fuel pump does both lift and high pressure to the rail. That is why it is so important to bleed the air out of the system from the tank, through the filter, to the fuel pump and back to the filter when changing the fuel filter.
The pump in the fuel tank only brings fuel over the drive shaft tunnel from the other side of the tank to keep the swirl pot at the end of the fuel line full.
Post #431964 22nd Apr 2023 11:47 am
View user's profile Send private message View poster's gallery Reply with quote
ozjeff62



Member Since: 28 May 2018
Location: Sydney, NSW
Posts: 494
Australia 2011 Freelander 2 SD4 SE Auto Ipanema Sand

Yes I've heard that, but reading the manual is interesting. The lift pump is integral to the injector pump. It seems to be a separate "component" but isn't separable. How and why? Why does the oil filter have to located where it is? Because Land Rover. MY11 SD4 SE Auto
Post #431965 22nd Apr 2023 12:20 pm
View user's profile Send private message View poster's gallery Reply with quote
jules



Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 4584
United Kingdom 2014 Freelander 2 SD4 SE Auto Firenze Red

The oil filter is where it is because the DW12 engine was a Peugeot/PSA design and used by Ford when they owned Landrover. Still a very awkward place though. Jules
Post #431969 22nd Apr 2023 3:06 pm
View user's profile Send private message View poster's gallery Reply with quote
jules



Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 4584
United Kingdom 2014 Freelander 2 SD4 SE Auto Firenze Red

ozjeff62 wrote:
Yes I've heard that, but reading the manual is interesting. The lift pump is integral to the injector pump. It seems to be a separate "component" but isn't separable. How and why? Why does the oil filter have to located where it is? Because Land Rover.



I think of the injector pump as a two stage device - low pressure suck and high pressure push Jules
Post #431970 22nd Apr 2023 3:07 pm
View user's profile Send private message View poster's gallery Reply with quote
Nodge68



Member Since: 15 Jul 2020
Location: Newquay
Posts: 1838
United Kingdom 2009 Freelander 2 TD4 SE Manual Rimini Red

ozjeff62 wrote:
Yes I've heard that, but reading the manual is interesting. The lift pump is integral to the injector pump. It seems to be a separate "component" but isn't separable. How and why? Why does the oil filter have to located where it is? Because Land Rover.


The lift pump is an internal part of the HP pump, not too different to sequential mechanical diesel pumps of old. The only difference with these pumps, is the single output to a fuel rail, so electronic injectors can be used.

As said above, the oil filter location is where it is because the engine wasn't really designed for this vehicle. On a Peugeot, Citroën or Ford it's easier to access but in the Freelander 2, the extra height of the slam panel and stronger lower cross member makes access more challenging. 2009 Rimini Red SE TD4. Soon to be sold.
Hyundai Ioniq 5 Ultimate on order.
Gone. 2006 Tonga Green i6 HSE.
Post #431973 22nd Apr 2023 5:22 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site