Freel2.com - View topic


Forum-Gallery-Shop-Sponsors « Advertise on Freel2.com

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > FL2 i6 CPS

Page 1 of 1

Print this entire topic ·

Catford

Member Since: 14 Aug 2022
Location: Sevenoaks
Posts: 2

FL2 i6 CPS

Hello
Please can anybody advise where the Crankshaft Position Sensor is located on a i6 3.2 ltr engine and if possible the process/sequence to replace the CPS
Thanks
Peter

15th Jan 2023 12:12 pm

merlinj79

Member Since: 14 Aug 2019
Location: San Diego
Posts: 313

Be aware that the shop manual uses "CPS" to mean "Cam Profile Switching", which is a solenoid.

The cam position sensors are labeled "CMP".

Download the shop manual, it has diagrams with labels and text descriptions of all components. Look in section 303-14a.

https://www.freel2.com/forum/topic10621.html

17th Jan 2023 11:49 pm

merlinj79

Member Since: 14 Aug 2019
Location: San Diego
Posts: 313

Forgot the wife took the other car, so I was able to take a pic. These are the CMPs, LH side facing forward, driver's side USA.

Process to R&R:

1. Unplug the electrical connector. If the lock tab breaks, just use a zip tie to re-secure the connector like I did.
2. Remove the bolt (torx?)
3. Pull the sensor out.

17th Jan 2023 11:57 pm

Page 1 of 1

All times are GMT + 1 Hour

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum