Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Technical > Wipers stopped working and plug identification
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
rhys_m



Member Since: 18 Aug 2019
Location: kent
Posts: 28

United Kingdom 2008 Freelander 2 TD4 SE Manual Zermatt Silver
Wipers stopped working and plug identification

Hi All,

Today of all days our fl2 has decided to stop having functioning window wipers (torrential rain here right now). I have been through some testing, I have checked the two relays for window wiping (one for on/off, the other for slow/fast) the slow/fast one is actuating, the on/off one is not. I have plugged in my reader and it has returned the fault code: B1095-14 which equates to

Wiper On/Off relay circuit -
short to ground, open
circuit

I am looking to test the wire when weather allows, however it seems all of the technical manuals don't give a description of the plugs, the cable goes from BCM plug-pin C1BP02A-43 to the fuse box. Does anyone know which plug that is? My XF manual gives plug colours at the start of the electrical drawings, but I am unable to find that for the freelander 2.

Thanks in advance for any pointers.

Rhys

Post #426919 16th Nov 2022 8:13 pm
View user's profile Send private message View poster's gallery Reply with quote
rhys_m



Member Since: 18 Aug 2019
Location: kent
Posts: 28

United Kingdom 2008 Freelander 2 TD4 SE Manual Zermatt Silver

Turns out it was the green plug, in case any googlers arrive here in the future

Post #427056 20th Nov 2022 3:13 pm
View user's profile Send private message View poster's gallery Reply with quote
BossBob



Member Since: 30 Sep 2010
Location: Bristol
Posts: 1238

England 2007 Freelander 2 TD4 GS Manual Baltic Blue

Thanks for following up with the solution you found.

Post #427064 20th Nov 2022 5:22 pm
View user's profile Send private message View poster's gallery Reply with quote
jules



Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 4517

United Kingdom 2014 Freelander 2 SD4 SE Auto Firenze Red

@Rhys
What was the cause of the wiper failure ? Jules

Post #427065 20th Nov 2022 5:56 pm
View user's profile Send private message View poster's gallery Reply with quote
rhys_m



Member Since: 18 Aug 2019
Location: kent
Posts: 28

United Kingdom 2008 Freelander 2 TD4 SE Manual Zermatt Silver

There's two relays, one that turns the wipers on and off, the other that switches fast and slow. Fast and slow relay was switching, but on and off wasn't, so there was no movement.

Found the white cable on pin43 of the green plug on the bcm was open circuit to the relay, ran a seperate cable in as the loom is too tight to find. It has been fine since, I just hope it's not the first of more broken cables!

Post #427136 22nd Nov 2022 10:41 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site