Hi All,

I've just replaced the throttle body on my FL2 2010, do I need to do any calibration or will it just re-learn?

Ta

If you have the diagnostic gear to do a TB calibration then do it. If not, I think you’ll find most people who have changed them have not had any issues by not calibrating them. (Now Sold). 2008 Freelander 2 (Nazca Sand) SE TD4 Auto. Statutory write off & on WOVR for hail damage but still road legal.
171037Km as of 09/05/22
Superchips Bluefin Flash
Nanocom Evo II (also sold)

Never had any problems when I replaced the TB on mine. Past: FL2 TD4 HSE Auto
Evoque SD4 Dynamic Lux Auto
Present: Audi A3 S Line.

Never recalibrated mine and it's fine. Steve

2008 TD4 HSE Auto, Zermatt Silver

Yup same here, after four years, no problems DAVE.
I.A.M. F1rst Driver.
Gone 2003 Discovery TD5 Auto,
Gone 1986 Defender 90 Station Wagon
Gone 1984 Range Rover 3.5 Vogue Manual.
Gone 1970 Series 11A/3 SWB 3.5 V8 Hybrid
Gone 1964 Series 11A LWB Van
Gone 1966 Series 11A SWB Van
Gone 1964 Series 11A LWB Station Wagon,

I'm glad I read this thread. Now I know TB coding is not 'mandatory' but likely a good procedure anyway.