Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Maintenance & Modifications > Nose bearing lubrication
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
LUKBENPHI



Member Since: 21 Oct 2020
Location: Derbyshire
Posts: 32

United Kingdom 
Nose bearing lubrication

Ok so can a failing diff nose bearing be lubricated?

Not looking to do anything dodgy like quieten it down a bit to sell it, it’s just a case of a knackered bearing, no money and a 60 mile daily commute at the moment, need to eek a bit more life out of it till o can afford to take it down to Bell engineering for a diff swap.

is it accessible at all from an external point of view?

Post #411319 12th Aug 2021 10:31 pm
View user's profile Send private message View poster's gallery Reply with quote
Bobupndown



Member Since: 26 Dec 2014
Location: Upside down behind the TV!
Posts: 2654

United Kingdom 2014 Freelander 2 SD4 GS Auto Orkney Grey

Lubrication of a worn bearing can't hurt but not sure how you would physically do that? Landrover - turning owners into mechanics since 1948

2014 Orkney grey Freelander SD4 GS.
2004 Zambezi silver Discovery 2 Td5 (Gone)
1963 Surf blue Morris Mini Minor Super de Luxe (my little toy)

Post #411322 13th Aug 2021 10:13 am
View user's profile Send private message View poster's gallery Reply with quote
alex_pescaru



Member Since: 12 Mar 2009
Location: RO
Posts: 4640

All lubrication happens internally when moving (rotating) and there is no way to lubricate it from exterior.

Post #411327 13th Aug 2021 4:06 pm
View user's profile Send private message View poster's gallery Reply with quote
Nodge68



Member Since: 15 Jul 2020
Location: Newquay
Posts: 1847

United Kingdom 2009 Freelander 2 TD4 SE Manual Rimini Red

Oil is flung under centrifugal force to the diff bearings. This is one area that the Freel2 to is very poor, compared to more conventional shaped diffs.

However if the bearing is making a noise, then replacing it is the only option. 2009 Rimini Red SE TD4. Soon to be sold.
Hyundai Ioniq 5 Ultimate on order.
Gone. 2006 Tonga Green i6 HSE.

Post #411329 13th Aug 2021 4:39 pm
View user's profile Send private message View poster's gallery Reply with quote
p_gill



Member Since: 06 Dec 2011
Location: USA
Posts: 1219

United States 2008 Freelander 2 i6 SE Auto Tambora Flame

The pinion bearing is splash lubricated by the ring gear.

If you want to make sure that your bearing is always submerged in oil then park with the front Tyres lower than the rear Tyres.


My driveway is steep, if I reverse into it my LR2 will be at an angle as described.



For mine I bought a magnetic drain plug to collect the particles. (but the noise wasn't loud)


Note: others have tried to do this when the bearing is really loud and they were not successful.



Good luck

Paul

Post #411330 13th Aug 2021 4:52 pm
View user's profile Send private message View poster's gallery Reply with quote
Jagracer



Member Since: 22 Feb 2019
Location: east anglia
Posts: 156

United Kingdom 2009 Freelander 2 TD4 GS Manual Bali Blue

Hi, I had a noisy diff repaired, but I still think it was a wheel bearing, as the bearings were not too bad. I have run Jaguars for many miles with noisy Diffs. with no failures. I have seen a collapsed F2 rear pinion bearing, it trashes the lot, including the case. So check the wheel bearings as well. I would check you have oil in the diff. housing, then reverse up a pair of ramps to push the oil forward, then see if it is still noisy. I always put EP90 Hypoid oil in a diff. You can then smell if you have a leaking seal! As I get older and deafer cars run longer between repairs, as I can only hear failure when it gets bad. Its worth checking the Bevel Box oil as well, often forgotten.

Best regards, Paul

Post #411333 13th Aug 2021 7:02 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site