Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Maintenance & Modifications > Hi - Roof Bars Question
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Adri123



Member Since: 21 Apr 2021
Location: Derbyshire
Posts: 1

United Kingdom 2009 Freelander 2 TD4_e GS Manual Zermatt Silver
Hi - Roof Bars Question

Hi all. New owner of a Freelander 2.

I want to fit roof bars but all info I can see involves drilling holes.

Is that right? Can't you just buy standard LR roof bars that fit without getting the drill out?

Would appreciate any help.

Nick

Post #406925 22nd Apr 2021 9:23 pm
View user's profile Send private message View poster's gallery Reply with quote
Lightwater



Member Since: 21 Aug 2014
Location: Sydney Northern Beaches
Posts: 4704

Ukraine 2013 Freelander 2 2.0T SE Auto Fuji White

Just 2 holes in the plastic trims at the front. Lift the trim up & have a look at where the roof rail bracket bolts are underneath. You just need to line up a hole through the plastic trim. A ruler helps.

Click image to enlarge


I installed my roof rails, it's not difficult but take your time, get the right tools. Not worth bug_ering up the roof.

Get a 21mm socket as you need to take 2 of these out & they can be very tough to free. Without a 21mm socket you can easily round the edges & you will be stuffed.



The 4 rear mounts have plastic plugs, very carefully drill, preferably with pin vise to make hollow, you don't need to drill through, then turn old with pointy nose pliers.
Click image to enlarge


They don't mention it, but run some Teflon tape around the thread of the new bolts you use. Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

Post #406928 22nd Apr 2021 10:13 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site