Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > United Kingdom > FL 2 - Memory Seat Module Issue
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Free_Willy_Uk



Member Since: 25 Mar 2021
Location: London
Posts: 1

United Kingdom 2013 Freelander 2 SD4 HSE Lux Auto Firenze Red
FL 2 - Memory Seat Module Issue

Hi everyone,

I'm a proud owner of a Freelander 2 HSE LUX 2013 model which I absolutely love. Unfortunately the driver's seat memory module was missing upon purchase. I called Land Rover main dealer and found out the correct part number for the seat module of my vehicle 'LR041896' and the engineering number is 'DJ32 14D600 AA'.

I purchased a second hand memory module on ebay with 'almost' the same engineering number 'BJ32 14D600 AF'. After installing, all the buttons including memory settings seem to work but only in small increments?! I am not sure if this due to the part numbers differing ever so slightly?

I called main dealers for a new module and they quoted me £203 + £210 to program!!!! I assumed it would simply be a plug and play but apparently not....

Has anyone else came across the same issue as me? I would really appreciate any help or guidance at this stage.

Thank you in advance.

Post #405781 25th Mar 2021 8:31 pm
View user's profile Send private message View poster's gallery Reply with quote
RogB



Member Since: 16 Dec 2014
Location: Mansfield
Posts: 3867

England 2013 Freelander 2 SD4 HSE Lux Auto Santorini Black

welcome to the forum
do you know why the module was missing ? there may be a fault with the wiring loom that led to the previous owner removing the module as the loom was at fault. Or maybe the seat was changed for some reason, hopefully not due to accident damage.
Have you had the codes read to see if they shed any light?
seem very unusual for the seat memory module to be removed unless there was an underlying reason

Rog

Post #405793 26th Mar 2021 7:46 am
View user's profile Send private message View poster's gallery Reply with quote
IanMetro



Member Since: 11 Sep 2017
Location: Somerset BS21
Posts: 2747

United Kingdom 2014 Freelander 2 SD4 Metropolis LE Auto Fuji White

Have you tried standing outside the car and driving the seat fully in all directions (even if it means multiple presses of the buttons.
Hopefully you can then confirm that there is no resistance to movement or physical damage.
And/or maybe, just maybe, the seat will magically reset itself and work, as other moving bits on the FL2 seem to do. FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 74k+ miles) (MY2015)

Post #405799 26th Mar 2021 10:19 am
View user's profile Send private message View poster's gallery Reply with quote
3landertwo



Member Since: 27 May 2020
Location: UK
Posts: 1089

https://www.freel2.com/forum/topic7539.htm...at+forward

I placed the words 'electric seat forward' in the SEARCH (of old posts) and found the above.

looks like the seat needs to be re-set ..... by dealer ???


try this.....

end seat calibration.

hold forward switch on, then started engine and seat went forward, must be away if resetting end points

Post #405801 26th Mar 2021 10:43 am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site