Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Maintenance & Modifications > Sump undertray
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Chrism551



Member Since: 01 Feb 2021
Location: Blackpool
Posts: 142

2012 Freelander 2 SD4 XS Auto Santorini Black
Sump undertray

Following on from my other issues, I seem to have a lot of oil around the intercooler pipes, bottom of engine and side of turbo. When I took the undertray off, I saw it has some form of oil absorbent pad attached with four plastic clips, well 3 in my case, which is in a right mess. Does anyone have the part number for this pad and clips as I want to degrease the whole thing and fit a new pad before refitting. Thanks in advance,. Cool

Post #404513 25th Feb 2021 7:18 pm
View user's profile Send private message View poster's gallery Reply with quote
jules



Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 4518

United Kingdom 2014 Freelander 2 SD4 SE Auto Firenze Red

I just scrubbed mine with soapy water and jet washed it clean. I think you might have to pop into your local JLR dealer to see if its even available. I googled it and got nothing useful. Jules

Post #404514 25th Feb 2021 7:47 pm
View user's profile Send private message View poster's gallery Reply with quote
jules



Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 4518

United Kingdom 2014 Freelander 2 SD4 SE Auto Firenze Red

Further searching .... I cannot find the pad listed separately from a new undertray (which is £200+)

eg

https://allbrit.de/epc.cfm?PAGE=5020615&am...SPRACHE=EN Jules

Post #404515 25th Feb 2021 8:05 pm
View user's profile Send private message View poster's gallery Reply with quote
SWalker



Member Since: 22 Jul 2020
Location: Norn Iron
Posts: 49

United Kingdom 2007 Freelander 2 TD4 SE Manual Barolo Black

its just sound proofing - dyno mat?
as for the oil leak time for a new separator? I had that on my to do along with a strip and clean of all those pipes there is a right oil stain on the lower grill to the left. Stewart
2007 Freelander 2 SE TD4
2007 A6 quattro 3.0 TDI Manual
1986 coupe quattro (kv) square wheels.
1972 mini 1400 100BHP A series

Post #404518 25th Feb 2021 9:21 pm
View user's profile Send private message View poster's gallery Reply with quote
Chrism551



Member Since: 01 Feb 2021
Location: Blackpool
Posts: 142

2012 Freelander 2 SD4 XS Auto Santorini Black

Thanks for that. I may look at a universal oil spill pad, and see what fits,I’ll report back and let you know. Thanks again for your help, quite new to this freelander 2 scene, but it’s bangernomics at its best. Not a huge value on a 2007 s but I’m happy to pick up a spanner to get the old girl back to her former glory

Post #404520 25th Feb 2021 10:00 pm
View user's profile Send private message View poster's gallery Reply with quote
Badger51



Member Since: 01 Mar 2014
Location: Coffs Harbour
Posts: 910

Australia 

SWalker wrote:
its just sound proofing - dyno mat?
as for the oil leak time for a new separator? I had that on my to do along with a strip and clean of all those pipes there is a right oil stain on the lower grill to the left.


Any oil in the grill area is almost always down to split intercooler hoses or a cracked intercooler, in my experience.
It would be well worth having a good look at them. (Now Sold). 2008 Freelander 2 (Nazca Sand) SE TD4 Auto. Statutory write off & on WOVR for hail damage but still road legal.
171037Km as of 09/05/22
Superchips Bluefin Flash
Nanocom Evo II (also sold)

Post #404521 25th Feb 2021 11:07 pm
View user's profile Send private message View poster's gallery Reply with quote
SWalker



Member Since: 22 Jul 2020
Location: Norn Iron
Posts: 49

United Kingdom 2007 Freelander 2 TD4 SE Manual Barolo Black

thanks badger - i have had to replace the boost pipe - top center. and i do have a stumble /hesitation at times split inter cooler would not help.
sorry for the partial hijack

Back to this padding, i know on other cars it is foam and sound proofing, as pointed out its a pad on the FL2. but if it was an oil mat would it not be a service item or at least more readily available? Stewart
2007 Freelander 2 SE TD4
2007 A6 quattro 3.0 TDI Manual
1986 coupe quattro (kv) square wheels.
1972 mini 1400 100BHP A series

Post #404531 26th Feb 2021 8:53 am
View user's profile Send private message View poster's gallery Reply with quote
iain cooper



Member Since: 27 Aug 2007
Location: north of Glasgow
Posts: 1989

Scotland 2009 Freelander 2 TD4_e HSE Manual Lago Grey

I had a similar issue with my Freelander and like you checked out a replacement padding and it was only available as part of the undertray.

Mine was beyond repair so I decided just to ditch it and eventually sold the car without one on.

It didn't seem to make much difference without the padding.

Iain

Post #405094 11th Mar 2021 9:16 am
View user's profile Send private message View poster's gallery Reply with quote
Andy131



Member Since: 09 Dec 2009
Location: Manchester
Posts: 2159

United Kingdom 

Forget the plastic undertray with sound deadening pad. 4-6mm aluminum versions are available online, add to that one that covers the fuel tank and have fun without fear of damaging your pride and joy. Tangiers Orange - gone, missing her
Replaced by Ewok what a mistake - now a happy Disco Sport owner

Post #405095 11th Mar 2021 9:46 am
View user's profile Send private message View poster's gallery Reply with quote
SWalker



Member Since: 22 Jul 2020
Location: Norn Iron
Posts: 49

United Kingdom 2007 Freelander 2 TD4 SE Manual Barolo Black

Hmm, plastic? mine is steel - cant remember if there was a pad or mat on it, think it might have but didnt pass comment wen in there so cant be sure. lol @chrism551 is yours plastic? Stewart
2007 Freelander 2 SE TD4
2007 A6 quattro 3.0 TDI Manual
1986 coupe quattro (kv) square wheels.
1972 mini 1400 100BHP A series

Post #405096 11th Mar 2021 10:14 am
View user's profile Send private message View poster's gallery Reply with quote
3landertwo



Member Since: 27 May 2020
Location: UK
Posts: 1089

The front sump "guard" is steel, although would dent easily, better to go for the thicker aluminium after market version.
the sump guard on the FL1 was plastic (cosmetic).

Post #405097 11th Mar 2021 10:52 am
View user's profile Send private message View poster's gallery Reply with quote
Chrism551



Member Since: 01 Feb 2021
Location: Blackpool
Posts: 142

2012 Freelander 2 SD4 XS Auto Santorini Black

Mine is metal too, currently not refitted until it’s degreased, painted, and some form of oil pad fitted. Looking to fit a universal oil pad, or better still, sack off the oil pad and fix the oil leaks. Mr. Green

Post #405172 12th Mar 2021 9:01 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site