Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > General > Does anyone know what this 90 degree pipe connector is for?
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
to-LR2



Member Since: 31 Dec 2019
Location: Toronto
Posts: 43

Canada 2010 LR2 i6 HSE Auto Lago Grey
Does anyone know what this 90 degree pipe connector is for?

While changing my battery yesterday in my 2010 LR2, I noticed this little connector sitting in the tray behind the old battery.

It was connected to anything.

Does anyone know what it is for?

Could it be related to the tube that connects to the top of the battery?

Post #383733 3rd Jan 2020 5:41 pm
View user's profile Send private message View poster's gallery Reply with quote
MotionInc



Member Since: 17 Jun 2019
Location: North America
Posts: 1291

Canada 2008 LR2 i6 SE Auto Tambora Flame

Looks like the vent pipe elbow.

Post #383734 3rd Jan 2020 5:44 pm
View user's profile Send private message View poster's gallery Reply with quote
GundogSD4



Member Since: 04 Dec 2019
Location: Wiltshire
Posts: 478

England 2015 Freelander 2 SD4 Metropolis LE Auto Santorini Black

It could be a water hose elbow for windscreen/headlight washers etc. 94 Disco 300 TDI Gone
96 Defender 300 TDI Gone...Should have kept it.
2003 Freelander ES TD4 Gone
2002 Defender TD5 Gone
2005 Freelander HSE TD4 Gone
2015 Freelander 2 Metropolis Keeping for now!

Post #383736 3rd Jan 2020 5:58 pm
View user's profile Send private message View poster's gallery Reply with quote
Largered



Member Since: 10 Jul 2016
Location: UK
Posts: 1978

MotionInc wrote:
Looks like the vent pipe elbow.


I think that also, as the pipe to elbow fitting is not pressure burred, as it would be for windscreen washer use. The union is only friction fit.

??

,

Post #383744 3rd Jan 2020 7:23 pm
View user's profile Send private message View poster's gallery Reply with quote
to-LR2



Member Since: 31 Dec 2019
Location: Toronto
Posts: 43

Canada 2010 LR2 i6 HSE Auto Lago Grey

Doesn't seem to be from the headlight washers because the headlights are still getting wet from the spray.

Vent is the best answer so far. If it is the vent, do I need to find out where it lost the connection? Or doesn't it matter.

Post #383752 3rd Jan 2020 9:08 pm
View user's profile Send private message View poster's gallery Reply with quote
MotionInc



Member Since: 17 Jun 2019
Location: North America
Posts: 1291

Canada 2008 LR2 i6 SE Auto Tambora Flame

The bent pipe fitting is simply to avoid the hose from kinking around a corner on the physical battery and preventing the gas from venting. Can you see where your hose is connected to the top of your battery? Is it connected directly to the top of the battery or is there another elbow fitting there in between the battery and the vent hose. Regardless, it should not be issue unless the battery can shift it's physical position, that should not be possible if it was properly installed. I think you had another thread with a pic of the new battery setup? I'll have a look but the pic was pretty dark from memory I think.

EDIT: Looks like there is a fitting on that pic so it's likely redundant now.............can you trace the vent pipe all the way? Personally, after looking at the pic (it's not dark BTW, I just have a bad memory Rolling with laughter ), your setup looks fine to me. Did you find the fitting during the install b4 new battery was fitted or after?

Post #383762 3rd Jan 2020 10:25 pm
View user's profile Send private message View poster's gallery Reply with quote
to-LR2



Member Since: 31 Dec 2019
Location: Toronto
Posts: 43

Canada 2010 LR2 i6 HSE Auto Lago Grey

Doesn't appear the be any kinks in the vent.

I found that fitting under the battery when I removed the old one. Maybe my friends at the dealership left it there from another event.


Post #383767 4th Jan 2020 12:15 am
View user's profile Send private message View poster's gallery Reply with quote
DEG5Y



Member Since: 22 Jul 2016
Location: Widnes
Posts: 145

United Kingdom 2009 Freelander 2 TD4 XS Auto Santorini Black

Looks like an old battery breather pipe.

Post #383910 5th Jan 2020 10:20 pm
View user's profile Send private message View poster's gallery Reply with quote
TooBlue



Member Since: 30 Oct 2019
Location: Midlands
Posts: 261

United Kingdom 

The connector should be attached to that pipe on right of the battery.
It then plugs into breather hole on end of the battery.

Post #383934 6th Jan 2020 10:06 am
View user's profile Send private message View poster's gallery Reply with quote
to-LR2



Member Since: 31 Dec 2019
Location: Toronto
Posts: 43

Canada 2010 LR2 i6 HSE Auto Lago Grey




You mean here?

Post #383952 6th Jan 2020 3:02 pm
View user's profile Send private message View poster's gallery Reply with quote
SYFL2



Member Since: 16 Jun 2012
Location: Sheffield
Posts: 2550

2007 Freelander 2 TD4 HSE Auto Stornoway Grey

That’s the one looks like someone lost the one you found and replaced,it or new battery had one on

Post #383954 6th Jan 2020 3:23 pm
View user's profile Send private message View poster's gallery Reply with quote
to-LR2



Member Since: 31 Dec 2019
Location: Toronto
Posts: 43

Canada 2010 LR2 i6 HSE Auto Lago Grey

Cool. Thumbs Up

Thanks everyone!

Post #384001 7th Jan 2020 4:53 am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site