Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com
Home > Technical > Freelander 2 - Throttle Body/Valve Issue
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
porterfree



Member Since: 10 Jun 2019
Location: New Jersey
Posts: 2
Freelander 2 - Throttle Body/Valve Issue

Click image to enlarge

Hello everyone,

I own a Freelander 2 - 2.2 TD4 (2008) at 100K miles. It started to make a continuous clicking noise coming most probably from the part seen on the picture. This happens only when I insert the remote control into the starter control unit (without pushing the start button). I couldn't hear whether the noise stops when I start the engine. But noise definitely stops when I remove the remote control.

Dealer says it is related to throttle valve and suggests replacing the unit. Can the throttle valve make a noise even before starting the engine?

Any idea what this problem could be related to?

Thanks in advance.

Update: Throttle body has been replaced and the clicking noise is gone.

Since I bought the car 2 years ago I have been hearing a very low screeching noise coming from the engine when I rev it up. That noise is also gone now. Clearly it was a throttle body related issue. Engine responsiveness is also better probably because the fuel filter is replaced too.

Thanks again for all the help and comments.

Last edited by porterfree on 12th Jun 2019 9:45 am. Edited 3 times in total
Post #373337 10th Jun 2019 10:00 am
View user's profile Send private message View poster's gallery Reply with quote
SYFL2



Member Since: 16 Jun 2012
Location: Sheffield
Posts: 2549
2007 Freelander 2 TD4 HSE Auto Stornoway Grey

I can’t see any pictures but I had a relay clicking in the passenger footwell when I had a steering lock problem.
Post #373338 10th Jun 2019 10:18 am
View user's profile Send private message View poster's gallery Reply with quote
IanMetro



Member Since: 11 Sep 2017
Location: Somerset BS21
Posts: 2764
United Kingdom 2014 Freelander 2 SD4 Metropolis LE Auto Fuji White

Link to Throttle Valve Search -- Happy Reading
http://www.freel2.com/forum/search.php?sea...rch_time=0 FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 76k+ miles) (MY2015)
Post #373343 10th Jun 2019 12:08 pm
View user's profile Send private message View poster's gallery Reply with quote
seagull1



Member Since: 23 Jan 2011
Location: Loughborough
Posts: 321
United Kingdom 2007 Freelander 2 TD4 GS Auto Sumatra Black

Yes, probably a damaged gear in the throttle body and it is trying to reset it self ready to start up.
The throttle body will usually wine when inserting the key and after shutting the engine down.

Richard. FL2 07 TD4 GS Auto
Ex 02 TD4 Auto
Post #373345 10th Jun 2019 12:28 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
porterfree



Member Since: 10 Jun 2019
Location: New Jersey
Posts: 2

That makes sense. Thanks for the info.
Post #373442 12th Jun 2019 9:29 am
View user's profile Send private message View poster's gallery Reply with quote
Ptrouse



Member Since: 03 Feb 2019
Location: Cheltenham
Posts: 6
United Kingdom 2008 Freelander 2 TD4 SE Manual Santorini Black
Does a throttle body need calibrating after replacement ?

In a related matter does anyone know if a calibration of the throttle body is required after its changes? I'm changing mine on Tuesday but could get a definitive answer from searches in Google. If it does can anyone help ?
Post #373921 22nd Jun 2019 1:35 pm
View user's profile Send private message View poster's gallery Reply with quote
seagull1



Member Since: 23 Jan 2011
Location: Loughborough
Posts: 321
United Kingdom 2007 Freelander 2 TD4 GS Auto Sumatra Black

When I fitted mine I switched the ignition on waited for the throttle body to stop hunting then started the engine, ran a bit rough for about 30 sec then was OK.

Richard. FL2 07 TD4 GS Auto
Ex 02 TD4 Auto
Post #373924 22nd Jun 2019 2:56 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
SteveC



Member Since: 11 Oct 2013
Location: St Ives, Cambs
Posts: 281
England 2008 Freelander 2 TD4 HSE Auto Zermatt Silver
Re: Does a throttle body need calibrating after replacement

Ptrouse wrote:
In a related matter does anyone know if a calibration of the throttle body is required after its changes?


Mine was just a case of "fit and forget" and it was absolutely fine.

No calibration. Steve

2008 TD4 HSE Auto, Zermatt Silver
Post #373961 24th Jun 2019 9:31 am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site