Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Maintenance & Modifications > More service issues
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
tunaz100



Member Since: 21 Apr 2008
Location: Formby
Posts: 99

United Kingdom 
More service issues

I bit the bullet and decided on sticking with the dealer service at their ridiculous prices! Having handed over £378 for the service including heater recall I now have a car worse than when it went in... the reversing sensors have gone haywire the shifter button on the auto stick doesn't work so it moves freely between PRND and the one touch window button now doesn't work.

I will let you know how I get on!

Post #35678 28th Jan 2009 8:48 am
View user's profile Send private message View poster's gallery Reply with quote
bjartin



Member Since: 10 Sep 2007
Location: Moved to Defender2.net.
Posts: 616

Denmark 2007 Freelander 2 TD4 HSE Manual Stornoway Grey
Re: More service issues

tunaz100 wrote:
I now have a car worse than when it went in...


It is risky to have the car in for service. I always think of what will be wrong this time. For something is wrong, almost always.
I had the car in for P014 last week, and now 3 minutes goes before my seat will be noticeably hot. Earlier this happen almost immediately.
You can say there are trifles, yes, but it is annoying. LR Freelander2 2,2 Td4 HSE manuel Stornaway Grey (Metallic) & Ebony Black Leather & Sun/Moon-roof & Bi-Xenon & Roof Rails & Tow bar & Body side rubbing strips & Cold climate pack & Privacy glass & NavTeq . Production Date: 11/5-2007 in Halewood.

Sorry, but I have changed to Defender 90 ", and I love my" tractor ".
http://www.youtube.com/bjartin

Post #35680 28th Jan 2009 10:07 am
View user's profile Send private message View poster's gallery Reply with quote
thetoothdoc



Member Since: 20 May 2007
Location: essex
Posts: 12

United Kingdom 2007 Freelander 2 TD4 XS Auto Izmir Blue

Had the same problem with the auto gear stick after the service dept at the local dealers changed the light on the gearbox.
I called out landrover assist as the garage deemed the car not safe to drive due to the possibility of knocking the gear into reverse whilst driving.
Took the guy about 30 mins to rectify the fault.
The odd thing is that someone drove my vehicle back from the dealers to my house with this fault!!!!!!

Post #35890 31st Jan 2009 11:04 am
View user's profile Send private message View poster's gallery Reply with quote
rover60



Member Since: 11 Jan 2008
Location: kent. Bside the Cside
Posts: 230

United Kingdom 2007 Freelander 2 TD4 HSE Auto Baltic Blue
Re: More service issues

tunaz100 wrote:
I bit the bullet and decided on sticking with the dealer service at their ridiculous prices! Having handed over £378 for the service including heater recall I now have a car worse than when it went in... the reversing sensors have gone haywire the shifter button on the auto stick doesn't work so it moves freely between PRND and the one touch window button now doesn't work.

I will let you know how I get on!


As for the auto.To move from park to reverse you have to push the knob in. From reverse you can go straight in to neutral or drive without pushing the knob in you can go from drive to neutral without the knob but it will not let you select reverse without the knob in 07my Freelander 2 HSE TD4 Baltic Blue,Privacy Glass,Ebony black leather,Land rover detachable towbar,S/S Side bars,Climair wind deflectors,Bramble Rash,

Post #35891 31st Jan 2009 11:09 am
View user's profile Send private message View poster's gallery Reply with quote
richh



Member Since: 22 Feb 2009
Location: scarborough
Posts: 33

England 

hi guys, there is a connector that has not been plugged back onto the gea leve assly, i noticed one was doing this on a manual one when it was in for a 30k. Richh they all do that!

Post #37548 22nd Feb 2009 12:57 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
richh



Member Since: 22 Feb 2009
Location: scarborough
Posts: 33

England 

the one touch windows is an easy fix, they disconnect the battery when doing the recall, this loses the top position measurement, just close all windows and then hold each switch in the up position one at a time until you hear a click from each regulator. hope this helps, Richh. they all do that!

Post #37549 22nd Feb 2009 1:01 pm
View user's profile Send private message View poster's gallery Send e-mail Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site