Hi! I wondering if someone knows if front and rear wheel bearing are the same for Freelander 2 - 2009?

Baught two rear wheel bearing, and after replacing the first one we realized that one on the front need to be replaced. I wondering if I can use reare that I have and for replacing front one.

Talk to your Land Rover agent or email one in UK and ask them if the part number is the same.  FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

Thanks Yorky Bob. I asked because I need answer today, Sunday

As afar as I am aware the front & rear wheel bearings are the same. A little research online will confirm it.👍

Nick (Now Sold). 2008 Freelander 2 (Nazca Sand) SE TD4 Auto. Statutory write off & on WOVR for hail damage but still road legal.
171037Km as of 09/05/22
Superchips Bluefin Flash
Nanocom Evo II (also sold)

Hi,

It seemed the early freelander had same bearing back and front.
Freelander 2 has part number LR041425 (rear bearing)
I can not find any one who sells the front bearing without the hub (part number LR003157)
I suppose if you have the resources to push the bearing out the hub you will discover, if it is the same.
I would advise (unless you have a workshop) you should consider buying the complete front knuckle.

Joe Fix it until it's broke !

Hi Joe! You are right. I realized that today. Don't buy front bearings without the hub. Rear bearings without hub are okay.

I have 12 ton bench press which pushes out the bearings but it is an expensive remedy if you only use it once. As I use it on other jobs its ok for me ( and also cracking brasil nuts at chrismas ) If it ain't ***ked don't fix it