any one done it ? thinking of buying some,but want ant advice about fitting.cheers.

i presume you'll know about the site, but look at

http://www.ownerinfo.landrover.com

the accessory fitting guide is a good to see whats involved, from memory you have to drill the front wing  Former Mod/Member, with the most post & Chicken George Arch nemesis

[quote="npinks"]i presume you'll know about the site, but look at

[url]http://www.ownerinfo.landrover.com[/url]

the accessory fitting guide is a good to see whats involved, from memory you have to drill the front wing [/quote]

Thanks Mate

Hi, new member, Yes light gaurds do need drilling for the front, had them fitted to my disco 3,(has since been sold) but still to get them for my fl2.

Full fitting instructions come in the boxes,yes you need to drill the front wings and bumper at the grill for the fronts also you need to drill the rear lamp lens an the rear wings behind the lens,you will need a nutsert tool to fit the nutserts that are in the packs,make sure your accurate with your marking out as wings are expensive!!!!!

enjoy Tony