CCF has different settings for the various seats available (6 way, 8 way etc) might be the issue 2014 SE Loire Blue SD4 Auto (MY15)
Gone - 2011 GS Baltic Blue, Retrofit Electric Leather, Side Steps, 19"SC's, Roof Rails, TT Sat Nav Mod, Retrofit Premium Audio, Retro fit 2013 Xenons with DRL & Sig Strip (Clutch at 47k)
Gone - 2007 GS Narvik Black, Privacy Glass, 19" SC's, Side Steps,Roof Rails, Roof Spoiler, Lamp Guards, Retrofit Electric Leather (Clutch at 115k)
Gone - 2007 SE Santorini Black (Clutch at 120k)
BT IID (best money ever spent on a car)

Thanks for reply took it to the local Indy and the 13my uses a different seat control module than the 12my the seats came from, there auto logic has not been able to program the module as it seems incompatible with the later MY any ideas other than change the module and who knows if the connections are the same?

MY13 cars have the same architecture as the evoque and other LR products, as far as I understand the two systems fitted to FL2, are completely different and interchanging control modules won't work.
That said, if the seats contain only motors and no control modules then a wiring job on the plug may work.

The drivers seat has the control modules fitted to it ,the passenger seat is working as it should it's just the drivers seat that needs the controls toggling to make it work,if I ignore the memory it must be possible to wire it direct so the motors work correctly?

I would have thought the seat would be the same just a difference in control module,I have ordered the my13 version to see if the wiring is the same, if it is I will bite the bullet fit it and hopefully get it programmed!

Had a look at the control module on the 13my and it has only two sockets as opposed to four sockets on the 12 and earlier model years so looks like I have gone as far as I can go so will just have to put up with toggling the switches on the drivers seat and no memory,could be worse,thank you for all replies.