Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com
Home > Maintenance & Modifications > Coolant Cap
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
shiggsy



Member Since: 13 Jan 2013
Location: Kent
Posts: 799
United Kingdom 2007 Freelander 2 TD4 HSE Auto Baltic Blue
Coolant Cap

Presumably when you unscrew this it shouldn't look like this? Is there a technique I am missing? Any suggestions on my next move?

Click image to enlarge


Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated Mr. Green  
Hung like Einstein, smart as a horse.
Post #247569 4th Jan 2015 1:44 pm
View user's profile Send private message View poster's gallery Reply with quote
shiggsy



Member Since: 13 Jan 2013
Location: Kent
Posts: 799
United Kingdom 2007 Freelander 2 TD4 HSE Auto Baltic Blue

I got the remainder of the cap out with a pair of pliers, there was just enough room and flex to get a serrated edge under the lip and go around the cap body easing it out. I thought the 4 prongs you can see embedded in the cap had sheared off the body but that doesn't appear to be the case, looks like it just relies on it being a tight fit. Unfortunately when the rubber seals on the body are a tighter fit it doesn't work and the cap part just levers itself off of the body. What a POS design?

Click image to enlarge


I shall put a smear of rubber grease on the seals before replacing it.

So crisis over on with the simple task of topping up the coolant as it was level with the MIN line. What could be easier? As I was slowly adding coolant I spotted a strange thing, the coolant was rising up to the MAX line, but also staying level with the MIN line.

Click image to enlarge




Ever start the simplest of tasks and just end up saying WTF ?

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated Mr. Green  
Hung like Einstein, smart as a horse.
Post #247579 4th Jan 2015 3:05 pm
View user's profile Send private message View poster's gallery Reply with quote
EYorkshire



Member Since: 18 Nov 2010
Location: (!)
Posts: 4392

Ah, know what you're on about now Thumbs Up Having never needing to top up I have never removed the cap and couldn't see what was wrong with your photo Smile
Post #247593 4th Jan 2015 3:38 pm
View user's profile Send private message View poster's gallery Reply with quote
shiggsy



Member Since: 13 Jan 2013
Location: Kent
Posts: 799
United Kingdom 2007 Freelander 2 TD4 HSE Auto Baltic Blue

Yes, just to be clear this is what it should look like.

Click image to enlarge



Smear of rubber grease and it comes off and goes back on easy now. :thumbsup:

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated Mr. Green  
Hung like Einstein, smart as a horse.
Post #247604 4th Jan 2015 4:36 pm
View user's profile Send private message View poster's gallery Reply with quote
alex_pescaru



Member Since: 12 Mar 2009
Location: RO
Posts: 4643

I, from time to time, unscrew the water cap and wipe the oil dipstick on those o-rings. Then I screw the cap back in. Works very easy every time when I want to unscrew.
The coolant, when evaporating, leaves behind some sticky powder residue that tends to stick on those o-rings and make the cap unscrew harder.
Post #247635 4th Jan 2015 7:36 pm
View user's profile Send private message View poster's gallery Reply with quote
littletriple



Member Since: 27 Mar 2014
Location: kent
Posts: 226
United Kingdom 2007 Freelander 2 TD4 HSE Manual Stornoway Grey

Did you work out why the coolant seemed to be at 2 levels? Strange... Shocked Shocked
Post #248244 8th Jan 2015 10:09 pm
View user's profile Send private message View poster's gallery Reply with quote
shiggsy



Member Since: 13 Jan 2013
Location: Kent
Posts: 799
United Kingdom 2007 Freelander 2 TD4 HSE Auto Baltic Blue

Not yet, I haven't driven it or looked at it again since topping up. Especially strange as its parked facing slightly downhill, i.e. towards the Min marker. 
Hung like Einstein, smart as a horse.
Post #248247 8th Jan 2015 10:25 pm
View user's profile Send private message View poster's gallery Reply with quote
littletriple



Member Since: 27 Mar 2014
Location: kent
Posts: 226
United Kingdom 2007 Freelander 2 TD4 HSE Manual Stornoway Grey

be interested what you find!
Post #248250 8th Jan 2015 10:47 pm
View user's profile Send private message View poster's gallery Reply with quote
shiggsy



Member Since: 13 Jan 2013
Location: Kent
Posts: 799
United Kingdom 2007 Freelander 2 TD4 HSE Auto Baltic Blue

Drove and re-checked. The MAX level has come down a bit and the MIN has risen a bit. The MIN still looks slightly lower, but it could be an optical illusion, its awkward to look at square on. Maybe those sections are compartmentalised somehow? 
Hung like Einstein, smart as a horse.
Post #249163 17th Jan 2015 12:57 pm
View user's profile Send private message View poster's gallery Reply with quote
littletriple



Member Since: 27 Mar 2014
Location: kent
Posts: 226
United Kingdom 2007 Freelander 2 TD4 HSE Manual Stornoway Grey

certainly odd. I'm going to have a close look at mine tomorrow.
Post #249203 17th Jan 2015 6:41 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site