|
|
| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Maintenance & Modifications > Front brake upgrade |
|
|
|
| le bouch Member Since: 15 Jan 2014 Location: UK Posts: 560
|
Watching with interest. I'm a bit underwhelmed with the braking on my FL2. But then my last car was a 911 so it's a bit of an unfair comparison |
||
|
| MidlandRover Member Since: 30 Jun 2013 Location: Derby Posts: 496
|
That's very interesting will keep an eye on developments. FL2 SD4 Metropolis Auto Santorini Black / ivory completely stock.
|
||
|
| Bill Turner Member Since: 08 Jul 2008 Location: Birkenhead Posts: 977
|
Would not this modification upset the front to rear braking balance?
|
||
|
| Bob Member Since: 12 Dec 2006 Location: Midlands Posts: 26
|
Be interesting to see if there are any vibration/juddering issues with the larger calipers. Brembos on RRS had to have harmonic dampers (steel masses) added to cure this. |
||
|
| gruodiz Member Since: 04 Dec 2011 Location: Klaipeda Posts: 108
|
Stock Freelander 2 diesel fronts 302mm vs. Volvo XC90 fronts removed from 4.4 petrol 336mm (most of XC90 has 336mm fronts). I'm going to mount them soon |
||||
|
| gruodiz Member Since: 04 Dec 2011 Location: Klaipeda Posts: 108
|
Bob no vibration with S80 calipers. Will let you know about XC90
|
||
|
| gruodiz Member Since: 04 Dec 2011 Location: Klaipeda Posts: 108
|
Fronts finally finished.
|
||
|
| gruodiz Member Since: 04 Dec 2011 Location: Klaipeda Posts: 108
|
|
||
|
| gruodiz Member Since: 04 Dec 2011 Location: Klaipeda Posts: 108
|
|
||
|
| gruodiz Member Since: 04 Dec 2011 Location: Klaipeda Posts: 108
|
Bob, for vibration, I didn't know that XC90 center bore/hole was bigger than Freelander 2, I found out that when started to mount all the parts so to avoid vibration due to dissalignment of the disc I put these center rings between hub and disc. It can hardly be seen in the picture anove |
||
|
| alex_pescaru Member Since: 12 Mar 2009 Location: RO Posts: 4644 |
Between FL2 and XC90, on the disc, the braking width zone is the same? Meaning the brake pads from the bigger calipers are sitting entirely on the FL2 disc?
|
||
|
| gruodiz Member Since: 04 Dec 2011 Location: Klaipeda Posts: 108
|
Dimenssion from center to breaking surface.
|
||
|
| Mav71 Member Since: 15 Nov 2008 Location: Leicester Posts: 2575
|
Even if the pad surface is the same, as the disc is bigger, it can lose the heat quicker . Having a bigger disc, and the calipers spaced out further, the gripping force is better. Also.
|
||
|
| Cambo Member Since: 08 Mar 2014 Location: Sydney, Australia Posts: 408
|
Good stuff!
|
||
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis








