Can anyone please advice me on how to store the memory on the electric seat adjustment.
When i follow thw manual instructions it tells you to adjust the seat then press the memory botton
followed buy pressing 1,2 or 3 within five seconds. also you should get a message (memory stored)
So i followed the instructions and,

1, the seat moves to another position
2, there is no message displayed

as per your instructions

press "M" then the seat number 1, 2 or 3

Don't forget to adjust the mirrors too  Former Mod/Member, with the most post & Chicken George Arch nemesis

Thank you for the reply but this is what i tried and it dos not work. the seat goes to a compleatley different position and i have to start all over again.

Start the engine.
Move the seat to your required position.
Move the door mirrors to your required driving position.
Put the car in reverse and adjust the mirrors to your required reversing position (normally tilted down slightly)
Select neutral.
Press the memory button, then the number you wish to store that position in (1 to 3).
The display should confirm "Memory x" stored. Job done!
I suspect that you haven`t had the engine running on your previous attempts.

ps. Last time I came through Basel was in February - at "Fasching" (spelling?) - You are all MAD! Don`t drive faster than your angel can fly!

Last edited by nicam on 3rd Apr 2008 1:11 pm. Edited 1 time in total

Thanks, I will try that and let you know if it works.

I worked, thanks very much, must have been the mirrors.