Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > General > How to remove door trims
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
djhampson



Member Since: 08 Sep 2007
Location: Brisbane
Posts: 124

Australia 2007 Freelander 2 TD4 SE Auto Rimini Red
How to remove door trims

I'm going to replace the speakers in my SE this weekend so I was hoping that someone has removed the door trims before me and that they can give me some tips.

Anyone with any tips? I've got the instructions from LR GTR however they could be more detailed.

Post #13107 16th Jan 2008 10:41 am
View user's profile Send private message View poster's gallery Reply with quote
djhampson



Member Since: 08 Sep 2007
Location: Brisbane
Posts: 124

Australia 2007 Freelander 2 TD4 SE Auto Rimini Red

No-one??

Looks like I'll have venture into uncharted territory...

Post #13149 17th Jan 2008 10:03 am
View user's profile Send private message View poster's gallery Reply with quote
npinks



Member Since: 28 Jun 2007
Location: Ls25
Posts: 20090

United Kingdom 

djhampson wrote:
No-one??

Looks like I'll have venture into uncharted territory...


Not done a thing with the speakers on my SE, I think they sound fine Shocked but then i didn't do Music at School so it may sound different to a trained ear. Former Mod/Member, with the most post & Chicken George Arch nemesis

Post #13151 17th Jan 2008 10:54 am
View user's profile Send private message View poster's gallery Reply with quote
djhampson



Member Since: 08 Sep 2007
Location: Brisbane
Posts: 124

Australia 2007 Freelander 2 TD4 SE Auto Rimini Red

I wouldn't say I'm trained but I do find the speakers a bit flat for my liking and then the tweeters in the door pillars distort which is why i'm keen to change them.

Post #13154 17th Jan 2008 11:08 am
View user's profile Send private message View poster's gallery Reply with quote
npinks



Member Since: 28 Jun 2007
Location: Ls25
Posts: 20090

United Kingdom 

I have to admit thinking about it, my brother how has a top of the range Volvo sound system in his V50 said it sounded flat when I first got the car.

Don't forget to take pictures of the process when taking the doors trims off and installing the new speakers Thumbs Up Former Mod/Member, with the most post & Chicken George Arch nemesis

Post #13157 17th Jan 2008 11:23 am
View user's profile Send private message View poster's gallery Reply with quote
wheatonshunter



Member Since: 29 Apr 2007
Location: Zuid Holland
Posts: 31

Netherlands 2009 Freelander 2 TD4 S Auto Tonga Green

djhampson,

I totally agree with you.
I am trying to work it out and scan the Forum on every message about this topic but stories keep coming different: no-go voor extra amps, someone says no-go for pimping speakers, so Question
AAs soon as I got a receipe, I go for it...

Dealer and LR have no idea... Sad

Good luck and keep us informed.

Post #13174 17th Jan 2008 4:13 pm
View user's profile Send private message View poster's gallery Reply with quote
djhampson



Member Since: 08 Sep 2007
Location: Brisbane
Posts: 124

Australia 2007 Freelander 2 TD4 SE Auto Rimini Red

On the weekend I went speaker shopping but I couldn't decide which speakers I wanted and the guy at JB Hi Fi suggested I put an amp in first and then see if I still needed to upgrade the speakers.

Turns out that was very good advice. I got home and installed a 4 channel Kicker Amp that I had spare. This made a huge difference - no more distortion, treble and mid-treble response is much better and the bass is also quite strong.

I tried to pull one of the door trims off but after I removed the 5 screws I couldn't get the trim to come off. I also didn't want to break it so I gave up.

The amp upgrade will probably do for me because combined with the 12" sub I have a decent sound quality.

I'm happy to answer questions about installing an amp its a realitvly painless exercise just a case of cutting the 8 speaker wires from the back of the headdeck and extending them down to the amp and then running new wires back from the amp to behind the headdeck again.

I need to find a better souce for the remote wire which turns the amp on as it currently stays on after the ignition is switched off and there is some slight buzzing however I know of a better place to get a 12v signal from. 2007 TD4 SE

Post #13372 21st Jan 2008 1:29 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site