Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Technical > Freelander 2 TD4 Auto Juddering Problems
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
woolleym



Member Since: 07 Feb 2013
Location: Derby
Posts: 5

United Kingdom 2010 Freelander 2 TD4 HSE Auto Santorini Black
Freelander 2 TD4 Auto Juddering Problems

I have a 2010 model which has done 36,000 miles and recently it has started to randomly judder. This occurs under acceleration, braking or even coasting and at various speeds. There are no warning lights shown and no faults recorded when inspected by Landrover. This shakes through the whole car and then disappears but happens at some point every journey and usually more than once. The garage have so far changed the 2 front driveshafts under warranty but it had no effect. They are now changing the torque converter.
Has anyone experienced this and knows what it is?
Also do they mean the Haldex control unit or is that just part of the torque converter?

Post #171291 11th Feb 2013 5:34 pm
View user's profile Send private message View poster's gallery Reply with quote
pab



Member Since: 28 Aug 2012
Location: Now in Mid-Wales
Posts: 2005

United Kingdom 2009 Freelander 2 TD4 XS Manual Lago Grey

A torque converter is what an auto has in place of a clutch - it's basically a viscous coupling. It has nothing to do with the haldex units.

Post #171295 11th Feb 2013 5:42 pm
View user's profile Send private message View poster's gallery Reply with quote
woolleym



Member Since: 07 Feb 2013
Location: Derby
Posts: 5

United Kingdom 2010 Freelander 2 TD4 HSE Auto Santorini Black

The car has now had the front driveshafts, torque converter and auto gearbox replaced but the car is still juddering. They are now checking the Haldex unit. I hope this solves it but will keep you posted.

Post #172522 21st Feb 2013 11:49 am
View user's profile Send private message View poster's gallery Reply with quote
alex_pescaru



Member Since: 12 Mar 2009
Location: RO
Posts: 4642

Have them checked the CKP (crankshaft position) sensor too... Very Happy
Especially it's position and connector contacts.

Post #172548 21st Feb 2013 3:34 pm
View user's profile Send private message View poster's gallery Reply with quote
woolleym



Member Since: 07 Feb 2013
Location: Derby
Posts: 5

United Kingdom 2010 Freelander 2 TD4 HSE Auto Santorini Black

I asked them about the CKP and they said it would register a fault on the ECU and there are no fault codes.

Post #172683 22nd Feb 2013 4:03 pm
View user's profile Send private message View poster's gallery Reply with quote
EYorkshire



Member Since: 18 Nov 2010
Location: (!)
Posts: 4392

If its doing it while coasting, would that not have ruled out the torque converter, engine etc and perhaps point more towards the Haldex or diff Exclamation

But in all honesty, there ain't much left now Whistle

Post #172685 22nd Feb 2013 4:10 pm
View user's profile Send private message View poster's gallery Reply with quote
lespes



Member Since: 10 Oct 2012
Location: Wilds of Wiltshire
Posts: 108

2011 Freelander 2 SD4 HSE Auto Indus Silver

Is the judder from front or rear Question

Rear tends to be haldex system

Front :driveshafts, transfer box or in my case gearbox

Hope its not that £4000 for a new one

Post #172738 22nd Feb 2013 10:09 pm
View user's profile Send private message View poster's gallery Reply with quote
woolleym



Member Since: 07 Feb 2013
Location: Derby
Posts: 5

United Kingdom 2010 Freelander 2 TD4 HSE Auto Santorini Black

They say It was the transfer box which I assume is the IRD

Post #174500 7th Mar 2013 5:18 pm
View user's profile Send private message View poster's gallery Reply with quote
johnny_22_83



Member Since: 05 Dec 2010
Location: bucuresti
Posts: 182

Romania 2008 Freelander 2 TD4 SE Auto Sumatra Black

so you got rid of the juddering problems?

Post #174573 8th Mar 2013 10:26 am
View user's profile Send private message View poster's gallery Reply with quote
woolleym



Member Since: 07 Feb 2013
Location: Derby
Posts: 5

United Kingdom 2010 Freelander 2 TD4 HSE Auto Santorini Black

Yes they changed the transfer box and the juddering has completely gone. So I now have 2 driveshafts, torque converter, auto gearbox and transfer box lucky it was under warranty. It took 6 weeks in total to find the cause but now car is running well and economy seems better too.

Post #174720 9th Mar 2013 4:04 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site