I have the old style interior light with only the main light. The newer models have the 2 map lights as well. I have got hold of a new unit with the map lights and it is a simle swap for the electrics, but think I'll have to cut a bit of the plastic back where the light fits into the roof trim.

Would anyone be so kind to remove their light and take a piccy of the cavity for me? It's only a case of sliding a knife between the unit and trim window side.

Prepare for a rattle

For change no cuts required.

HSE TD4, Auto, alpaca, matt black&carbon fibre wrapping, 235/65 R17 Conti CrossContact AT, 60mm H&R wheel spacers, Matzker sump guard, self-build side protection tubes, tinted headlamps, smoked side repeaters, auxiliary head lamps, caliper unit matt black powder-coated, colour coated front grille (without LR badge), side vents, light housing, Kuda iPhone console, car cigar jack in boot, „Black Rope“ dash trim kit, …

You're a star Roverland . I see what I've done wrong then, I've bought a Modeo light, it's a bit fatter than yours but fits the shape. Do you know if these are available from a dealer?

They say that Ford Focus C-max has the same light. It has a less price in our country 
Freelander II 2,2 TD SE Stornoway Grey

Sorry for my wry English. I began to study it recently.
I'll be thankful for your corrections of my mistakes

I have the new light in the front, but one main light for the rear seat.

Do they fit eachother? Can I fit one with the map lights to rear? 2010 Freelander 2 Select TD4 auto....gone
2011 Freelander 2 TD4 auto ...current

@ Wintermute: Yes, the new map light MJ09 fits the rear too.

@ smellee: That´s the part number for map light MJ09: LR 006480, price in germany is 22,16 EUR. HSE TD4, Auto, alpaca, matt black&carbon fibre wrapping, 235/65 R17 Conti CrossContact AT, 60mm H&R wheel spacers, Matzker sump guard, self-build side protection tubes, tinted headlamps, smoked side repeaters, auxiliary head lamps, caliper unit matt black powder-coated, colour coated front grille (without LR badge), side vents, light housing, Kuda iPhone console, car cigar jack in boot, „Black Rope“ dash trim kit, …

Thanks again Roverland. Just ordered mine from sponsors £40 including courier for 2 of the blighters.

lar wrote:

They say that Ford Focus C-max has the same light. It has a less price in our country

ROVERLAND wrote:

For change no cuts required.

Anyone know how to remove this main roof section that the light is situated in?........those small 'grills' on my GS are covered from the inside with a small disc of foam, I was thinking of using these for ambient light?

Anyone know what purpose they serve

Either -
a) Air temperature sensors
b) Bluetooth handsfree microphone
Think my money's on b)

Are they anything to do with the internal sensors for the alarm

Don't think so ad, I've got a pod fixed to the roof (the size of a rounded glasses case) inbetween the two sunroofs that is the alarm sensors.

Sorry, for the confusion, will keep mouth shut.

No please don't, it's a forum, observations/comments are always welcome