Hi all hope you are all well.
I have a free l 2 2007 with alpine sound system.
Stop working just powers up then turns it self off.
Have substituted CD Drive,control panel,
Amp but was of eBay lol,have checked fib optic all seem to be doing there thing and loop seems good.
Done wiring checks to as best as possible Had most looms out to visually look,fuse box’s out etc etc
any ideas guys or is it a lap top job at land rover 😩
Cheers in advance 🙂

Does it have the Bluetooth module? If so, try using a bypass loop to see if that corrects the problem and if so, replace the BT module.

Hi Stu thx for that I’ve done that already tho bypassed all and still not having it.(with fib loop)
Done the resetting with rear fuse box buzz bar every time as well
Whats doing my head in it did couple of months ago carried out same diagnostic as doing now ,found the amp at fault bought one fitted working perfectly for about a month then packed up again so thought dogde eBay amp got another fitted worked for about a minute and packed up.
Done all diag again this time can’t get there this time everything shows fine to me?

Cheers

wylie wrote:

Hi all hope you are all well.
I have a free l 2 2007 with alpine sound system.
Stop working just powers up then turns it self off.
Have substituted CD Drive,control panel,
Amp but was of eBay lol,have checked fib optic all seem to be doing there thing and loop seems good.
Done wiring checks to as best as possible Had most looms out to visually look,fuse box’s out etc etc
any ideas guys or is it a lap top job at land rover 😩
Cheers in advance 🙂

Thank you so much..they need to be configured to control panel after fitting ok so need an IDS on it .go from there .
Thank you all for your help much appreciated 👍🏻