Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com
Home > Maintenance & Modifications > glow plugs module
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
tascusi



Member Since: 19 Oct 2018
Location: pesaro
Posts: 83
Italy 2009 Freelander 2 TD4 HSE Manual Narvik Black
glow plugs module

Greetings to the whole community.
Could someone please tell me where the glow plug control unit is located on the 2008 FL Td4 2?
Thanks
Post #415162 28th Nov 2021 8:46 am
View user's profile Send private message View poster's gallery Reply with quote
Geobloke



Member Since: 03 Nov 2018
Location: Darkest Denbighshire
Posts: 130
Wales 2008 Freelander 2 TD4 HSE Manual Zermatt Silver

I believe it is just a relay in the engine compartment fuse/relay box, not a module as in the later Freelander 2s.

https://www.freel2.com/forum/topic37636.html
Post #415168 28th Nov 2021 11:09 am
View user's profile Send private message View poster's gallery Reply with quote
tascusi



Member Since: 19 Oct 2018
Location: pesaro
Posts: 83
Italy 2009 Freelander 2 TD4 HSE Manual Narvik Black


This should be it. The one shown in the link you posted is the fuse box. There are the fuses and the relay that controls the glow plugs. There should also be the control unit that I showed you in the picture.

Post #415173 28th Nov 2021 12:44 pm
View user's profile Send private message View poster's gallery Reply with quote
andyk159



Member Since: 19 Nov 2014
Location: Skegby
Posts: 368
United Kingdom 2010 Freelander 2 TD4 HSE Auto Stornoway Grey

From my research before changing my own glowplugs.

For chassis numbers up to AH999999 the glowplugs are LR001302 11volt controlled by main ECU via relay in fusebox as previously stated.

From chassis number BH000001 the glowplugs are LR022300 5volt and do have a separate controller. I think this is MY2011 onwards

As your vehicle is 2008 I would suggest the first option applies, and no separate controller. Andy
Freelander2 HSE (59 Plate, MY10 spec)
Post #415174 28th Nov 2021 1:12 pm
View user's profile Send private message View poster's gallery Reply with quote
tascusi



Member Since: 19 Oct 2018
Location: pesaro
Posts: 83
Italy 2009 Freelander 2 TD4 HSE Manual Narvik Black

In other words, since there is no separate controller, to check if the glow plugs receive current, first of all I have to check fuse F4, Relay R4 and fuse F1.
Secondly, I'll have to check the wiring.
Post #415205 29th Nov 2021 12:11 pm
View user's profile Send private message View poster's gallery Reply with quote
Geobloke



Member Since: 03 Nov 2018
Location: Darkest Denbighshire
Posts: 130
Wales 2008 Freelander 2 TD4 HSE Manual Zermatt Silver

Yup that's correct and if it makes you feel any better I will also be doing the same thing suspecting that all of Phoebe's glow plugs are dead Rolling Eyes
Post #415209 29th Nov 2021 1:01 pm
View user's profile Send private message View poster's gallery Reply with quote
andyk159



Member Since: 19 Nov 2014
Location: Skegby
Posts: 368
United Kingdom 2010 Freelander 2 TD4 HSE Auto Stornoway Grey

tascusi wrote:
In other words, since there is no separate controller, to check if the glow plugs receive current, first of all I have to check fuse F4, Relay R4 and fuse F1.
Secondly, I'll have to check the wiring.


If you haven't already checked or changed glowplugs I would suspect them first. For a 2007 vehicle they are likely to be dead. My 2009 had 4 duff plugs. Andy
Freelander2 HSE (59 Plate, MY10 spec)
Post #415212 29th Nov 2021 2:36 pm
View user's profile Send private message View poster's gallery Reply with quote
Grimdog



Member Since: 08 Sep 2020
Location: Wakefield
Posts: 311
United Kingdom 2010 Freelander 2 TD4_e HSE Manual Barolo Black

Having starting cold starting problems myself, see my thread for where I am up to, and a bit of help getting to the fuses in question.

https://www.freel2.com/forum/topic37636.html

Plenty of advice and how to's on here regarding changing the glow plugs.

good luck
Post #415218 29th Nov 2021 4:19 pm
View user's profile Send private message View poster's gallery Reply with quote
tascusi



Member Since: 19 Oct 2018
Location: pesaro
Posts: 83
Italy 2009 Freelander 2 TD4 HSE Manual Narvik Black

I already changed the glow plugs last year. But I have only recently been having difficulty starting when the weather is cold. Among other things, the preheat warning light no longer lights up. So I suspect the integrity of the glow plug circuit.
Post #415306 1st Dec 2021 12:43 pm
View user's profile Send private message View poster's gallery Reply with quote
tascusi



Member Since: 19 Oct 2018
Location: pesaro
Posts: 83
Italy 2009 Freelander 2 TD4 HSE Manual Narvik Black

Grimdog wrote:
Having starting cold starting problems myself, see my thread for where I am up to, and a bit of help getting to the fuses in question.

https://www.freel2.com/forum/topic37636.html

Plenty of advice and how to's on here regarding changing the glow plugs.

good luck


I had already read your thread and the fuses are okay, haven't checked the relay yet
Post #415307 1st Dec 2021 12:44 pm
View user's profile Send private message View poster's gallery Reply with quote
GlynnB



Member Since: 20 Feb 2012
Location: South Yorkshire
Posts: 127
England 2009 Freelander 2 TD4 HSE Auto Zermatt Silver

Have you checked that you fitted the correct ones. When I did mine I hadn't realised that there were 2 types and although 50/50 chance I had fitted the wrong ones which burnt out straight away. Silver 2009 HSE
Post #415317 1st Dec 2021 3:24 pm
View user's profile Send private message View poster's gallery Reply with quote
tascusi



Member Since: 19 Oct 2018
Location: pesaro
Posts: 83
Italy 2009 Freelander 2 TD4 HSE Manual Narvik Black

I checked the fuses and they are correct
Post #415771 10th Dec 2021 11:31 am
View user's profile Send private message View poster's gallery Reply with quote
GlynnB



Member Since: 20 Feb 2012
Location: South Yorkshire
Posts: 127
England 2009 Freelander 2 TD4 HSE Auto Zermatt Silver

Sorry I wasn't clear. I meant the glow plugs. There are 5 volt and 11 volt ones. I had originally fitted the 5 volt ones not realising that 2 types were available. Silver 2009 HSE
Post #415774 10th Dec 2021 1:06 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site