The power steering pipe at rack end has corroded, lost oil now parked up.
Got the assembly LR029185 almost looks like a set of bagpipes.
Great delivery from LRparts.
Reading up on fitting this seems to be a major operation in trying to fit this pipe to the one coming down from the pump.
Would it be better to also replace the pipe from the pump to make assembly and fitting easier?
I bow to superior knowledge.
Thanks Jim A
Fl2 HSE 2010 auto
Disco 2Td5 auto 2002 gone
Disci 1 300Tdi auto 1996 gone

Don't know about superior knowledge, more a case of it's easy once you know how. and a hell of a lot easier to do than describe in words.

I used a pair of round hose pliers.

The holding connection is a plastic ring that needs to be pushed up to release it but it has to be pushed up as a complete ring no use trying say a screwdriver. There lies the problem. The pipe from the bottle needs to be disconnected to ease the upward push.

You can get aircon pipe disconnectors to do the job but as I say I used round hose pliers.

https://www.amazon.co.uk/Lisle-37000-Condi...B0002SRCK6

https://www.amazon.co.uk/Tubayia-Spark-Plu...rpt=PLIERS

Last edited by I Like Chips on 12th Nov 2021 8:05 pm. Edited 2 times in total

Thanks for the info, goes into the garage monday morning.
Appreciate bit of an awkward job.
Real B----- not having the car. Rural area. Jim A
Fl2 HSE 2010 auto
Disco 2Td5 auto 2002 gone
Disci 1 300Tdi auto 1996 gone

The closest I have seen to the connector is in this movie of a GM brake line connector, it's not exactly the same but it should give an idea of the plastic ring on the break bottle pipe.

The ring needs to be pushed up to release the pipe. Look at the movie from 2.50 mins to 4 mins. The tool they made resembles the plastic air con line disconnectors in a previous post.

Hi Chips,
no attachment
No worries

jim Jim A
Fl2 HSE 2010 auto
Disco 2Td5 auto 2002 gone
Disci 1 300Tdi auto 1996 gone

Here it is


&ab_channel=BritannicaRestorationsLtd