Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Maintenance & Modifications > Another Wishbone Post
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Eurolandy



Member Since: 09 Oct 2010
Location: Cleveleys, Lancashire
Posts: 285

England 2013 Freelander 2 TD4 GS Manual Orkney Grey
Another Wishbone Post

Following on from another post of mine on this subject I've decided to finally change the front wishbones due to an MOT advisory on bush wear.

Has anyone attempted this on a FL2? I'm sure there was a post on here a while ago but I've done a search and cannot find it.

There is a good video on U Tube showing removal on a Mondeo Mk4 which has a very similar set up, but was a little worried as the mechanic struggled with removing the old wishbone. Looks like when the car is jacked up and the suspension fully extended a lot of strain is put on the rear bush mounting making it very difficult to remove from the subframe. Only way around it was to jack the front suspension up to take the strain off which could be difficult for the DIYer at home.

Anyone any advice (apart from getting a garage to do it) Confused

Thanks,

Chris Gone:
2002 FL1 TD4 GS Zambezi Silver
2007 FL2 TD4 GS Izmir Blue

Post #360055 6th Nov 2018 1:49 pm
View user's profile Send private message View poster's gallery Reply with quote
Yorky Bob



Member Since: 28 Apr 2015
Location: Yorkshire
Posts: 4561

United Kingdom 2013 Freelander 2 TD4 GS Manual Firenze Red

This may help a bit:



Screwfix do spring clamps and if fitted and tightened before you remove the lower wishbone may keep a lot of weight off but thats my best guess. I would want a trolley jack and bottle jack to hand for this sort of job plus axle stands.

https://www.screwfix.com/p/hilka-pro-craft...lsrc=aw.ds FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

Post #360059 6th Nov 2018 2:52 pm
View user's profile Send private message View poster's gallery Reply with quote
Steve D



Member Since: 19 Jan 2013
Location: Essexshire
Posts: 4092

United Kingdom 

I’ve never done one on an FL2 but I’ve done many on Mondeos. Many people struggle to get the ball joint out of the hub because there is not enough space to lever the ball joint out as the wishbone hits on the subframe. The way to do it easily on Mondeos (and this may work on FL2’s) is to remove the subframe mounting bolts on the side you are working on. You then have enough room to remove the ball joint and then the wishbone. Hope this helps. Past: FL2 TD4 HSE Auto
Evoque SD4 Dynamic Lux Auto
Present: Audi A3 S Line.

Post #360062 6th Nov 2018 3:36 pm
View user's profile Send private message View poster's gallery Reply with quote
Eurolandy



Member Since: 09 Oct 2010
Location: Cleveleys, Lancashire
Posts: 285

England 2013 Freelander 2 TD4 GS Manual Orkney Grey

Thanks for the info guys, very helpful. Just need to work out where to do it now. My garage is a bit narrow for jobs like this on the FL2 and I haven't picked the best time of year for doing it outside! Gone:
2002 FL1 TD4 GS Zambezi Silver
2007 FL2 TD4 GS Izmir Blue

Post #360102 7th Nov 2018 1:13 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site