Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Wheels & Tyres > Impact Wrench Recommendations
Post Reply  Down to end
Page 1 of 2 12>
Print this entire topic · 
Bobbster



Member Since: 30 Aug 2018
Location: Helston
Posts: 89

United Kingdom 2013 Freelander 2 SD4 Dynamic Auto Mauritius Blue
Impact Wrench Recommendations

Decided for the winter/summer tyre swap over (and any other time for a wheel/tyre change) to save time, I have decided to get a cordless impact wrench to speed the process up.

I am looking for something like this https://www.machinemart.co.uk/p/clarke-cir...mpact-wre/
not sure it will be quite up to the job though?

Any recommendations welcome

Post #359632 29th Oct 2018 6:13 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Lightwater



Member Since: 21 Aug 2014
Location: Sydney Northern Beaches
Posts: 4704

Ukraine 2013 Freelander 2 2.0T SE Auto Fuji White

I have a Bosch 10.8v 115Nm 3/8" Blue Professional. It's brutal on nuts & screws, more likely to snap things off if not careful. I haven't tried it on the car wheels. It probably is not enough. But my main view is their hammering action is so sharp I don't think it is the best tool for wheel nuts in the long run. I have heard of situations where the actual nut starts spinning in the nut hex cover then you are in trouble.

I have a 3/4 inch tee handle which once you get the nut loose, which has never been difficult with this size handle, you then simply centre the handle to spin the nut off or on.

Also, 2ah batteries are as useless as herding cats. Get a 6ah battery, I have a couple these for other Bosch 18v tools. Also get a pair of UVEX xV Earmuffs 37db or you will bug_er your hearing with impact wrenches. I think they may have reduced the rating 1db now. They are round fluro green, not the blue ones, or oval. Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18


Last edited by Lightwater on 29th Oct 2018 9:15 pm. Edited 2 times in total

Post #359648 29th Oct 2018 8:58 pm
View user's profile Send private message View poster's gallery Reply with quote
Bobbster



Member Since: 30 Aug 2018
Location: Helston
Posts: 89

United Kingdom 2013 Freelander 2 SD4 Dynamic Auto Mauritius Blue

Thanks lightwater, with the FL2 wheel nuts tightened to 140nm I thought a wrench with about 3x the power may do the job. Will certainly get a larger battery. Also heard about the nuts just spinning under the cover. Liked the look of the AEG 1/2" impact wrenches but getting them in the UK is expensive compared to others

Post #359649 29th Oct 2018 9:07 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Vanny



Member Since: 06 Dec 2015
Location: Cheshire
Posts: 436

United Kingdom 2013 Freelander 2 SD4 XS Auto Santorini Black

I've got the smaller of the Makita 18v LXT 1/2" impacts, it's cracking around the car and in timber construction projects, but it's a bit on the weak side for wheel bolts. I've used a much more powerful DeWalt one which was excellent.

Word of warning. Buy the correct sockets or the bolt heads will be trashed if they are shinny!

Post #359651 29th Oct 2018 9:18 pm
View user's profile Send private message View poster's gallery Reply with quote
Bobbster



Member Since: 30 Aug 2018
Location: Helston
Posts: 89

United Kingdom 2013 Freelander 2 SD4 Dynamic Auto Mauritius Blue

Thanks Vanny any idea which model the dewalt was?

Post #359652 29th Oct 2018 9:54 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
chicken george



Member Since: 05 Dec 2007
Location: N. Yorks
Posts: 13283

United Kingdom 2008 Freelander 2 TD4 XS Manual Santorini Black

had a ryobi for several years, very regular use, goes well.must have impact sockets it eats normal sockets

building up a range of ryobi tools so have plenty of batteries now.

leaf blower
drill
circ saw
jigsaw
plane
hedge cutter
vac
torch At work
At home

"I can't always believe facts I read on the web" - Charles Dickens

winner by default of the tractor vs caravan race

Post #359653 29th Oct 2018 10:00 pm
View user's profile Send private message View poster's gallery Reply with quote
Lightwater



Member Since: 21 Aug 2014
Location: Sydney Northern Beaches
Posts: 4704

Ukraine 2013 Freelander 2 2.0T SE Auto Fuji White

I have an ancient Metabo 18 volt hammer drill. I needed to upgrade but went 10.8 volt (pretend 12 volt) & can't believe how good these things are these days. So much lighter than 18 volt & good enough for most things. Easier to handle, especially overhead.

Bosch 10.8 volt (12 volt) Blue Professional:
Hammer drill GSB x 2 (this is far better than the brushless)
Brushless drill (compact)
Impact wrench 115Nm (snaps screws if not careful!)
Circular saw (very thin blade is surprisingly useful)
Angle grinder (brilliant tool overall, & to get into small spaces or overhead use for hours of work)
Dremel equivalent
GLI LED flood light x 3 (handy)
vacuum
1.3ah battery x 1 (useless at best!)
2.5ah battery x 4 (ok)
4.0ah battery x 4 (far better) (They now do 6.0ah)
chargers x 3

18 volt
Palm sander (work well)
leaf blower (work well!)
vacuum (got it because it was cheap)
6.0 ah battery x 2

If I need a big drill I have a 1100 watt hammer drill & a small GSH 388 demolition hammer (a decade old). Current favorite tool is the very small Bosch 10.8v angle grinder! Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

Post #359657 30th Oct 2018 12:16 am
View user's profile Send private message View poster's gallery Reply with quote
JonMs



Member Since: 25 May 2018
Location: Ilkley
Posts: 100

United Kingdom 2011 Freelander 2 SD4 HSE Auto Santorini Black

I bought this DeWalt earlier this year and it is brilliant! Caravan hub nuts are are tightened to 290Nm and this thing has them off in seconds. Only downside it that it is a bit big and heavy for smaller stuff but it will shift anything.

https://www.amazon.co.uk/gp/product/B00VXN...&psc=1

Post #359712 31st Oct 2018 9:37 am
View user's profile Send private message View poster's gallery Reply with quote
Bobbster



Member Since: 30 Aug 2018
Location: Helston
Posts: 89

United Kingdom 2013 Freelander 2 SD4 Dynamic Auto Mauritius Blue

Ha, the dewalt XR does look tempting but I was thinking somewhere around the 450-650nm range so slightly smaller but still able to do the wheel changes

Post #359770 31st Oct 2018 10:21 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Bobupndown



Member Since: 26 Dec 2014
Location: Upside down behind the TV!
Posts: 2622

United Kingdom 2014 Freelander 2 SD4 GS Auto Orkney Grey

chicken george wrote:
had a ryobi for several years, very regular use, goes well.must have impact sockets it eats normal sockets

building up a range of ryobi tools so have plenty of batteries now.

leaf blower
drill
circ saw
jigsaw
plane
hedge cutter
vac
torch

Thinking of getting the Ryobi 1/2" impact wrench, it seems a good piece of kit and I like the idea of 1 battery for all. Landrover - turning owners into mechanics since 1948

2014 Orkney grey Freelander SD4 GS.
2004 Zambezi silver Discovery 2 Td5 (Gone)
1963 Surf blue Morris Mini Minor Super de Luxe (my little toy)

Post #359807 1st Nov 2018 6:43 pm
View user's profile Send private message View poster's gallery Reply with quote
chicken george



Member Since: 05 Dec 2007
Location: N. Yorks
Posts: 13283

United Kingdom 2008 Freelander 2 TD4 XS Manual Santorini Black

Go careful its addictive, once you have the battery you want it all.

Never done wheel nuts with mine, but its in use most weeks often daily.
Comes with an adaptor to hex so you can use tek screws to mend any problems with brute force At work
At home

"I can't always believe facts I read on the web" - Charles Dickens

winner by default of the tractor vs caravan race

Post #359819 2nd Nov 2018 8:13 am
View user's profile Send private message View poster's gallery Reply with quote
Bobbster



Member Since: 30 Aug 2018
Location: Helston
Posts: 89

United Kingdom 2013 Freelander 2 SD4 Dynamic Auto Mauritius Blue

Well there were lots to choose from and in the end I opted for this one https://www.milwaukeepowertools.co.uk/milwaukee-m18fmtiwf12-0

Thanks for all the recommendations/advice

Post #359821 2nd Nov 2018 8:24 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
chicken george



Member Since: 05 Dec 2007
Location: N. Yorks
Posts: 13283

United Kingdom 2008 Freelander 2 TD4 XS Manual Santorini Black

milwakee are highly rated on the farmers forum, not cheap but known for quality, maybe trading on their past reputation rather than present offerings.

Same parent company as Ryobi as it happens.

I recently got my shipping container broken into, they nicked stihl and karcher saws blowers and power washers, and left my quality ryobi gear on the shelf, Im quite offended Big Cry At work
At home

"I can't always believe facts I read on the web" - Charles Dickens

winner by default of the tractor vs caravan race

Post #359831 2nd Nov 2018 11:00 am
View user's profile Send private message View poster's gallery Reply with quote
Lightwater



Member Since: 21 Aug 2014
Location: Sydney Northern Beaches
Posts: 4704

Ukraine 2013 Freelander 2 2.0T SE Auto Fuji White

chicken george wrote:
Go careful its addictive, once you have the battery you want it all.

Lets not muck around here:

New Milwaukee 1" battery impact wrench https://shoptoolreviews.com/automotive/imp...deo/34019/

I can't find specs on this but it should be about 2500 - 2900Nm, she'll break anyone's nuts! Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

Post #359834 2nd Nov 2018 11:49 am
View user's profile Send private message View poster's gallery Reply with quote
Bobupndown



Member Since: 26 Dec 2014
Location: Upside down behind the TV!
Posts: 2622

United Kingdom 2014 Freelander 2 SD4 GS Auto Orkney Grey

Hold on to that too tightly and it will spin the car around Shocked Landrover - turning owners into mechanics since 1948

2014 Orkney grey Freelander SD4 GS.
2004 Zambezi silver Discovery 2 Td5 (Gone)
1963 Surf blue Morris Mini Minor Super de Luxe (my little toy)

Post #359887 3rd Nov 2018 10:55 am
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 1 of 2 12>
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site