hi guys got a set pf Fog/DRLs from (a Powerful co. in the \uk ) and purchased a wiring kit. I can't find any info on where I can tap into the ignition cct - or accessory cct be it a fuse or relay. I also have one green wire coming from the controller which is not shown on the control box legend. Unit is eBay item number:323029023100
Any suggestions/help would be very much appreciated, thanks in advance dru337

it could be the positive of ignition

Have you checked their website - they usually have videos showing the fitting

Thanks for replies and info, much appreciated, dru337

I fitted similar and used a spade connector into one of the connectors in a spare relay socket in under bonnet fusebox. I think it was the relay socket for adaptive headlights which becomes live with ignition.

I can't help with the extra wire but I fitted some switchback drl/indicator bulbs and powered them from and empty slot in the fuse box using a piggy back fuse.



 2007 TD4 XS Manual in Sumatra Black

Just looked at the wiring listing and it says Green wire is for strobe which maybe a warning light for the dashboard to say they're on????





I'm surprised the light didn't come with their own wiring 2007 TD4 XS Manual in Sumatra Black

Reading your posted instructions, I can only imagine that the strobe wire is feed from the horn button to give 'emergency vehicle' strobe lighting when horn is pressed.
Good if you are Prime Minister or Royal Family, and have that sort of inferred authority. FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 76k+ miles) (MY2015)