Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Off Topic > Cambelt costs
Post Reply  Down to end
Page 2 of 2 <12
Print this entire topic · 
Mowog



Member Since: 11 Apr 2018
Location: Cheshire
Posts: 433

Doesn’t the list say it’s a chain?

Post #350632 1st Jun 2018 12:13 am
View user's profile Send private message View poster's gallery Reply with quote
The Doctor



Member Since: 09 Jul 2010
Location: Gallifrey
Posts: 4614

United Kingdom 

Yes but the garage disagree with the list as does the Audi main dealer. The engine is ridiculously quiet when running which in itself suggests belt rather than chain. LL.B (Hons) - University of Derby
LOT (Lord of Time) - University of Gallifrey

Post #350634 1st Jun 2018 7:12 am
View user's profile Send private message View poster's gallery Reply with quote
Dartman the one



Member Since: 04 Apr 2013
Location: Seville, Spain
Posts: 1650

England 

Fairly easy to check the timing covers are different, with a belt they are wider and should be dry inside, with a chain they are thinner possibly made of alloy rather than plastic ( though could be plastic) but the water pump is external to the timing cover as opposed to internal on the belt driven camshafts. my PC is slightly to the right of Genghis
2012 HSE SD4 In Orkney Grey now gone, best car ever.

Post #350635 1st Jun 2018 8:20 am
View user's profile Send private message View poster's gallery Reply with quote
Mowog



Member Since: 11 Apr 2018
Location: Cheshire
Posts: 433

The Doctor wrote:
Yes but the garage disagree with the list as does the Audi main dealer. The engine is ridiculously quiet when running which in itself suggests belt rather than chain.
. Thumbs Up

Post #350636 1st Jun 2018 8:38 am
View user's profile Send private message View poster's gallery Reply with quote
Yorky Bob



Member Since: 28 Apr 2015
Location: Yorkshire
Posts: 4561

United Kingdom 2013 Freelander 2 TD4 GS Manual Firenze Red
Now done but

Got the Fl2 back today from the local garage thats soon to close. With antifreeze and the labour it was £225 and I supplied the kit and ancillary belt and crank bolt. So about £325 all in.

Down side was the brake backing plate was catching and there is a new noise in the ancillary belt area that may or may not settle in. I suspect the ancillary belt will have to come off to establish the culprit. The down side of getting past doing it yourself. FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

Post #367850 5th Mar 2019 5:51 pm
View user's profile Send private message View poster's gallery Reply with quote
SouthamFL2



Member Since: 08 Jan 2019
Location: Banbury Borders
Posts: 432

United Kingdom 2013 Freelander 2 SD4 HSE Lux Auto Baltic Blue

I have had a call today, on a bank holiday, from Guy Salmon Coventry, who have offered me to replace my 7 year Cambelt and change it for a fixed price of £295 inc. Apparently, there is a huge push on vehicles over 3 years old for general repairs as well as servicing, with rates fixed by the manufacturer and the difference in what Sytner would normally charge in the form of rebate back to them.

Has anybody else been approached by a main stealer regarding out of warranty general repairs? If so, can anyone else confirm what else is included with a cambeltt change, I.e. Does it include the tensioners/water pump/pulleys etc? If it does, then that is a damn good price, but the service bint that rang me didn't know, so thought that I would throw it out there.... MY13 HSE Lux.......faultless since new.

Post #372670 27th May 2019 3:27 pm
View user's profile Send private message View poster's gallery Reply with quote
9Dave9



Member Since: 13 Jan 2018
Location: East Ayrshire
Posts: 29

United Kingdom 2009 Freelander 2 TD4 HSE Auto Santorini Black

When I got a quote it was also fixed at £295, when I asked if it included the water pump was told no that would be another £180 so I went to my local Indi.

Post #372671 27th May 2019 3:46 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 2 of 2 <12
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site