Hi all,

I have been thinking about doing something with the rear piller covers for a little while now as I dislike the strange textured mat black original finish on them. Was looking at colour coordinating them as I have seen that here however have decided to get them wrapped in gloss black to add the wrapped glass/floating roof look of Land Rovers current design focus.

I'm really happy with it and I personally think it really goes well with the tints too, what do you guys and gals think?

On to the next tinker choices choices hmmmmm...........

Click image to enlarge

Click image to enlarge

When I read this I thought that you were doing the C-Pillars / Door Frame to give a floating roof effect.
If this is your next project, please post a photo. FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 76k+ miles) (MY2015)

I like it
I would also like to see a complete floating roof  No Longer the owner of a 2013MY Fuji White GS

"Fiat Lux" a philosophy not a car

Looks really nice I’ve never understood why JLR used that textured plastic so high up on the vehicle. It doesn’t even match any of the plastics. MY14 Kahn Converted Dynamic - Fuji White Ebony/Pimento Interior
MY15 Xenon Headlight Conversion

MY17 RRS SVR - Estoril Blue Cirrus/Ebony 🪣💺’s

Looks a lot better, more so with the tinted windows. Really like it. MY13 HSE LUX Aintree Green
MY57 SE Stornoway Grey. Gone
Nissan X Trail
Discovery V8 LPG
Series II Land Rover

Works or me.

Think it would also suit my unique black edged lights.
https://www.freel2.com/gallery/displayimag...&pos=5 FL2 now gone and have a couple of items left for sale:-

Brodit active iPhone holder + Brodit dash clip,
Bluetooth Music Streaming Module.

Looks great.
Did you remove them for wrapping or did you do them still attached to the car?
If you took them off were they easy to remove? MY06 FL1 TD4 2 door red (gone)
MY07 FL2 SE TD4 black (gone)
MY13 FL2 GS TD4 Santorini black

Looks very nice

What's next?

Floating or Cantilever?



Floating

Click image to enlarge

Click image to enlarge

It’s a simple, but big improvement

It reminds me of the look of the glass wraps in the same location at the back of the early BMW MINI’s (until the Accountants took back control and replaced the glass wrap with a cheap plastic infill )

its a big from me

(way better than colour coded white )


this seems to be a trend with Defenders now as well with full glass sides

Yep looking great. How much did it cost to get them wrapped? Landrover - turning owners into mechanics since 1948

2014 Orkney grey Freelander SD4 GS.
2004 Zambezi silver Discovery 2 Td5 (Gone)
1963 Surf blue Morris Mini Minor Super de Luxe (my little toy)

DarrenW wrote:

Looks great.
Did you remove them for wrapping or did you do them still attached to the car?
If you took them off were they easy to remove?

Bobupndown wrote:

Yep looking great. How much did it cost to get them wrapped?

I actually wrapped them myself as a test to see if i liked them so it only cost me around £6 for enough gloss wrap to cover both, I actually have a bit left so an going to wrap the steering wheel switch packs when I have the time

Plan to take them next to a professional automotive wrapper to get them done again although Im actually happy at my first attempt so might try again to see if I can get it perfect.

 If your going through hell, keep going!

Wrapper of rear pillars 😀

p_gill wrote:

Looks very nice

What's next?

Floating or Cantilever?



Floating

Click image to enlarge

Cantilever

Click image to enlarge

Hmmm not sure about wrapping the C pillar so don't think I will go that far however never say never  If your going through hell, keep going!

Wrapper of rear pillars 😀

LR NUT wrote:

Looks really nice I’ve never understood why JLR used that textured plastic so high up on the vehicle. It doesn’t even match any of the plastics.

Thanks Nut I knew I had seen the colour coding somewhere Decided to match the windows instead of sanding them flat and Zermatting the hell out of them which I'm pleased with.

I have no idea, it doesn't match anything else on the car so made no sense to me either but the B pillar material is pants too so might do that too at some point. If your going through hell, keep going!

Wrapper of rear pillars 😀