Hi guys. Got all the electric leather in and all plugged in but I have these 4 wires which were pre cut. I assume two of them go to a switched live feed in the passenger fuse box and two go to ground. Can somebody please just confirm which is which as I’m having a brain spaz. Thank you!

What exactly are we looking at? 3 x FL1 2 manual + 1 auto
5 x FL2 4 manual + 1 auto
Now Discovery Sport P250 MHEV SE

This Dorset:

 FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

 Past: FL2 TD4 HSE Auto
Evoque SD4 Dynamic Lux Auto
Present: Audi A3 S Line.

Fun over, no idea but someone did put up a link to a full wiring diagram once if you can find it or maybe the link to the workshop manual may help. With my eyes I can only just read an underground map.

Is the other seat not just a mirror image ?

I think later seats do not fit earlier cars due to wiring changes. FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

http://www.freel2.com/forum/topic31489.html

From the info given I cannot recognise the wires, even in the seat sensing or restraint system.
Not quite sure about colours in pictures.

To try yourself--
Download wiring diagrams
Use 'find' (on page) function to look for wire colours (as shown on diagrams, e.g. bk-wh)
Step through highlighted diagrams.

PS - best to stick to one post stream per subject -- just resurrect it if no replies coming in. FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 76k+ miles) (MY2015)