Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Technical > 4-wheel alignement
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
MRRover75



Member Since: 13 Jan 2017
Location: Sandnes
Posts: 316

Norway 2007 Freelander 2 TD4 HSE Manual Tambora Flame
4-wheel alignement

Hi all,

As my wheels wears on the inner edge, especially on the rears, I have suspected the wheel alignment to be out of spec. I contacted a local garage yesterday as they had an advertisement for a quick alignment control which only took 10 minutes to complete for only £20. I took the chance and had it done. The results showed that the toe in was out of spec both front and rear. Most out on the rear. The other values was within spec. This situation is not new for many of us I guess, but I was pretty impressed that there is now equipment available that can do this in under 10 minutes!! A great thing to do if only a check is needed. They claimed that the measurements was pretty rough compared to the common equipment but gives a good status. Conventional 4 wheel alignment is needed when an adjustment shall be done. So now I have booked the car in for alignment and adjust the next week, at another garage with a better price Very Happy I also suspect that the inner wear may be the cause for the "bearing noise" I have had the last months. Crossing fingers Smile

Post #332403 4th Oct 2017 12:26 pm
View user's profile Send private message View poster's gallery Reply with quote
markclay68



Member Since: 04 Feb 2018
Location: stoke on trent
Posts: 5

United Kingdom 2008 Freelander 2 TD4 GS Manual Zermatt Silver

Hi, any update on this at all? I have a bearing noise and hoping it is a rear bearing or alignment rather than diff

Post #341848 8th Feb 2018 6:03 pm
View user's profile Send private message View poster's gallery Reply with quote
MRRover75



Member Since: 13 Jan 2017
Location: Sandnes
Posts: 316

Norway 2007 Freelander 2 TD4 HSE Manual Tambora Flame

Hi,

4-wheel alignment has been done. I had to cut and drill out the old eccentric/adjustment bolts and install new for the rear links prior to the alignment as the old ones had seized solid. All angles are now within spec. No change to noise or behavior, but I hope the tires will now wear evenly.

P.S.
Tires also changed.


Last edited by MRRover75 on 9th Feb 2018 4:35 pm. Edited 1 time in total

Post #341912 9th Feb 2018 1:06 pm
View user's profile Send private message View poster's gallery Reply with quote
Past master



Member Since: 30 Jun 2010
Location: Isle of Ely
Posts: 2710

United Kingdom 

"Bearing noise" can be down to your tyres. Goodyears, but some others too, can become very noisy once they are down to 4-5 mm. Easy to check - if it's tyre noise it will vary according to the road surface. Ex AA Series III LWB Safari - Gone
300TDi Disco (bought new - terrible car) sent back after 18 months
Freelander 1 Estate - leased, given back at end of lease
200TDi Disco (bought from a mate with 100,000 on the clock) - Gone
Disco 2 TD5 - sold and exported to France
FR2 TD4 GS - Gone
FR2 SD4 HSE - Now changed for a DS
New model ex-demo Evoque S 180 in white
Unable to order a new DS, so gave up. Now have a Volvo S90 Recharge.

Post #341916 9th Feb 2018 3:01 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site