Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Wheels & Tyres > Spare wheel advice sought
Post Reply  Down to end
Page 1 of 2 12>
Print this entire topic · 
Phil S



Member Since: 06 Sep 2012
Location: Glasgow
Posts: 50

Spare wheel advice sought

Hi there, looking for a bit of spare wheel advice. I've not got a spare wheel and as we're planning a drviing holiday this summer thought it might be a good idea to get one or should I stick with the Holts tyre repair/the Continental repair that comes with the car.

Has anyone used either of these? Do they do the job for a short term repair?

I've had a look in a couple of scrap yards for wheels but no luck. Where's the best place to get one? Any ideas in Scotland would be welcome. I'd also need to buy a jack and wrench.

In my old Disco there was a storage space for the jack, is there one in the Freelander.

My car's an 07.

Thanks
Phil

Post #295176 31st Mar 2016 11:16 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
dunkley201



Member Since: 09 Jul 2011
Location: Lincolnshire
Posts: 2739

United Kingdom 2010 Freelander 2 TD4 HSE Auto Stornoway Grey

Get a proper spare wheel & tyre from ebay. Search for Freelander 2 wheel & tyre. Some are even being sold with the correct jack and wheel brace. Although a suitable scissor jack plus a universal wheel brace can be obtained from a local motor factor. The jack is stored under the spare in the boot. Do a search on the forum and you may find a picture of the exact item. Whatever you do, don't rely on repair kits! FL2 wheels can be 16" to 20" diameter, I suggest you get a spare wheel the same diameter as your originals.

Bob 10MY (Sept 09) TD4 HSE Auto in Stornoway Grey (Now Gone)

08 FL2 TD4 SE Manual in Rimini Red (Now Gone)

Post #295178 31st Mar 2016 11:45 pm
View user's profile Send private message View poster's gallery Reply with quote
ronp



Member Since: 15 Jun 2009
Location: 🌲Galloway🌲
Posts: 1477

Scotland 

I'd never trust that repair gunk.
Anytime I've used it (on other people's Tyres) it's never worked!

I've even taken it out of my mountain bike Tyres and put tubes back in place.

Horrible stuff.

As said, get yourself a spare wheel, jack and brace.
But make sure you do a dummy run to make sure everything works ok.
I bought a jack etc for the last car I had and when I did my dummy run it didn't work!
Because the car was a low slung sports model, the Jack wouldn't lift without touching and potentially damaging the side skirts.
That allowed me to adapt it in readiness for whenever I'd need to use it.

Btw, nothing wrong with keeping a can of gunk along with the jack and tools FL2 now gone and have a couple of items left for sale:-

Brodit active iPhone holder + Brodit dash clip,
Bluetooth Music Streaming Module.

Post #295184 1st Apr 2016 8:26 am
View user's profile Send private message View poster's gallery Reply with quote
ianbevan



Member Since: 04 Apr 2013
Location: The North
Posts: 97

Wales 

I got a jack and wheel brace like new I don't need i gave £50 for it the proper thing to go inside the wheel just have to workout the postage if you like. Ian

Post #295185 1st Apr 2016 9:02 am
View user's profile Send private message View poster's gallery Reply with quote
westville



Member Since: 12 Jun 2015
Location: Dunston
Posts: 1096

United Kingdom 2013 Freelander 2 TD4 GS Manual Fuji White

Agree with all of the above - get a spare wheel - that gunk may be alright for a backup to a real wheel
Look on Gumtree I've seen a few on there this year
You might consider getting a matching wheel - or a steel wheel spare depends on what type and size wheel you have - search on here for advice about what fits in the wheel well No Longer the owner of a 2013MY Fuji White GS

"Fiat Lux" a philosophy not a car

Post #295188 1st Apr 2016 9:20 am
View user's profile Send private message View poster's gallery Reply with quote
mudslinger



Member Since: 10 Jun 2010
Location: Deep in a cave in the hills
Posts: 1035

Wales 2014 Freelander 2 SD4 HSE Lux Auto Sumatra Black

No spare with my (new to me) hse just gunk and a compressor,
bought wheel exact match of e-bay (still in box lr number on it and on box never opened )
had new matching tyre wrangler put on local ,total sub £300 dealer wanted £389 + vat for wheel alone ..!! )

gunk and compressor no use when tyre shredded on back road miles from know where .....
try getting a tyre at 2 am in Llandofgodknowswherethisplacemightbeindaylight Dip yer hand in yer wife,s purse and get a real spare .... tyre that is Whistle Whistle Whistle Wales
Were the mud is thicker, and the ruts are deeper.
(And we have the water to wash it off, and more on the way..! )
Sd4 and chrome Ar*e piece, Auto box for best fun
09 Xs Gone
12 xs Gone
HSE with Leather seats and 4 years warrenty.. staying for now !

Post #295260 2nd Apr 2016 11:04 am
View user's profile Send private message View poster's gallery Reply with quote
Past master



Member Since: 30 Jun 2010
Location: Isle of Ely
Posts: 2710

United Kingdom 

Keep an eye on the "for sale" section of the forum. Lots of wheels come up there, sometimes spares, sometimes singles. I have in the past bought a set off e-bay, kept one and sold the rest on at a profit. Also gave away a steel spare to a forum member once (sorry, that was a one-off!). One option is to buy a set of four with c**p tyres and put winter tyres on them. You can use one of them as your spare, and use one of your summer wheels as a spare in winter. Ex AA Series III LWB Safari - Gone
300TDi Disco (bought new - terrible car) sent back after 18 months
Freelander 1 Estate - leased, given back at end of lease
200TDi Disco (bought from a mate with 100,000 on the clock) - Gone
Disco 2 TD5 - sold and exported to France
FR2 TD4 GS - Gone
FR2 SD4 HSE - Now changed for a DS
New model ex-demo Evoque S 180 in white
Unable to order a new DS, so gave up. Now have a Volvo S90 Recharge.

Post #295280 2nd Apr 2016 4:55 pm
View user's profile Send private message View poster's gallery Reply with quote
Past master



Member Since: 30 Jun 2010
Location: Isle of Ely
Posts: 2710

United Kingdom 

Re above - there's a set of wheels in the for sale section - set of four or seller will split. Suit you? Ex AA Series III LWB Safari - Gone
300TDi Disco (bought new - terrible car) sent back after 18 months
Freelander 1 Estate - leased, given back at end of lease
200TDi Disco (bought from a mate with 100,000 on the clock) - Gone
Disco 2 TD5 - sold and exported to France
FR2 TD4 GS - Gone
FR2 SD4 HSE - Now changed for a DS
New model ex-demo Evoque S 180 in white
Unable to order a new DS, so gave up. Now have a Volvo S90 Recharge.

Post #295282 2nd Apr 2016 5:04 pm
View user's profile Send private message View poster's gallery Reply with quote
Tradewind 35



Member Since: 04 Dec 2012
Location: Cornwall
Posts: 441

United Kingdom 2007 Freelander 2 TD4 GS Manual Baltic Blue

Spare wheel and tyre is the way to go. As an example - came back to the Freely after dinner out on Christmas Eve a few years back. Rear tyre flat - big nail through the sidewall. Without a spare that would have cattle trucked plans for the Christmas holiday motoring! Not so easy to find a tyre retailer open on Christmas Day or Boxing Day.

Post #295357 3rd Apr 2016 12:19 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Tigger



Member Since: 30 Mar 2011
Location: L15KRD
Posts: 2555

United Kingdom 

Forget buying a standard scissor jack, go down to Machine Mart and buy a decent bottle jack!

Post #295367 3rd Apr 2016 5:32 pm
View user's profile Send private message View poster's gallery Reply with quote
rsash



Member Since: 20 Jan 2015
Location: Pineapple Picking Country
Posts: 90

Wales 2014 Freelander 2 TD4 SE Manual Orkney Grey

Except that a proper jack fits the proper jacking point

Post #295370 3rd Apr 2016 6:42 pm
View user's profile Send private message View poster's gallery Reply with quote
Tigger



Member Since: 30 Mar 2011
Location: L15KRD
Posts: 2555

United Kingdom 

It certainly does! It mind be pretty hopeless as a jack, but at least it fits nicely Thumbs Up

Although there's nothing special about jacking points and I'd rather use a decent quality jack, with plenty of capacity to spare, placed under something properly structural. Very Happy

Post #295380 3rd Apr 2016 8:34 pm
View user's profile Send private message View poster's gallery Reply with quote
Phil S



Member Since: 06 Sep 2012
Location: Glasgow
Posts: 50

Dear All

Thanks for all your replies, buying a wheel and jack from Spatch, just need a wrench, any offers???

Cheers
Phil

Post #295387 3rd Apr 2016 9:26 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Past master



Member Since: 30 Jun 2010
Location: Isle of Ely
Posts: 2710

United Kingdom 

I generally use a socket and t-bar. You'll need a socket anyway as the wheelnuts should be properly torqued up when you change the wheel (98lb/ft). A short extension to go with the socket is also very helpful. Ex AA Series III LWB Safari - Gone
300TDi Disco (bought new - terrible car) sent back after 18 months
Freelander 1 Estate - leased, given back at end of lease
200TDi Disco (bought from a mate with 100,000 on the clock) - Gone
Disco 2 TD5 - sold and exported to France
FR2 TD4 GS - Gone
FR2 SD4 HSE - Now changed for a DS
New model ex-demo Evoque S 180 in white
Unable to order a new DS, so gave up. Now have a Volvo S90 Recharge.

Post #295390 3rd Apr 2016 10:08 pm
View user's profile Send private message View poster's gallery Reply with quote
Spatch



Member Since: 20 Feb 2015
Location: Kent
Posts: 170

England 

Phil S wrote:
Dear All

Thanks for all your replies, buying a wheel and jack from Spatch, just need a wrench, any offers???

Cheers
Phil


Phil,

There is a short wrench with the Jack. You will need an extension bar though. BMW X3 30d M Sport - Current (problem free)
2014 SD4 Auto HSE Lux - Gone (too many problems)
2012 TD4 Manual XS - Gone (too many problems)

Post #295398 4th Apr 2016 7:58 am
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 1 of 2 12>
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site