Hello!
I want to buy an arm rest.
From what i searched, i have alpaca leather.
And, i found two arm rests to my FL2.
The DA5111 and the DA5106.
What is the difference between these two?
Regards
Joao Reis

DA5111 - http://www.nk4x4.com/DA5111.html

DA5106 - http://www.nk4x4.com/DA5106.html

DA5111 - Freelander 2 - up to 2012 - with factory fitted armrests

DA5106 - Freelander 2 - up to 2012 - with no factory fitted armrests GONE - '07 TD4 GS manual Zermatt Silver
LONG GONE - '55 Norton Dominator 99 SS cafe racer

I don't understand it!

If i want to buy an arm rest is because i don't have factory fitted arm rest.

So, the DA5111 is to change with the original one that comes already fitted?

Last edited by JoaoPintoReis on 13th Jun 2015 10:49 pm. Edited 1 time in total

If you want to buy an armrest because you don't have factory fitted then buy and fit a DA5106.

If you already have factory fitted armrests but want to add a centre storage cubby box then buy and fit a DA5111 that just happens to look like an armrest.

As far as I remember from earlier posts, you cannot retrofit the factory armrests. The replacement part will be for a broken original. Most people fit the Woodco centre armrest and cubby hole. Have a look at http://www.freel2.com/forum/topic22065.html?highlight=armrest Ex AA Series III LWB Safari - Gone
300TDi Disco (bought new - terrible car) sent back after 18 months
Freelander 1 Estate - leased, given back at end of lease
200TDi Disco (bought from a mate with 100,000 on the clock) - Gone
Disco 2 TD5 - sold and exported to France
FR2 TD4 GS - Gone
FR2 SD4 HSE - Now changed for a DS
New model ex-demo Evoque S 180 in white
Unable to order a new DS, so gave up. Now have a Volvo S90 Recharge.

HappyNomad wrote:

If you want to buy an armrest because you don't have factory fitted then buy and fit a DA5106.

If you already have factory fitted armrests but want to add a centre storage cubby box then buy and fit a DA5111 that just happens to look like an armrest.

Between the two seats i have like this: (but in alpaca colour)

Yes... Without factory fit armrests to get in the way you can fit either but I imagine that DA5111 will be noticeably narrower and possibly less tall to fit between the factory fitted armrests than DA5106.

If you don't have factory fitted armrests then fitting a DA5106 is probably the best way forward.

Hello!
I bought the DA5106.
Today i fitted it in place and ti looks great.
The only thing that i think that is missing is a locking button.
Regards
Joao Reis

What happens after 2012, is it hard luck?

Nothing is hard luck in life if you take the time to look for it ...

http://pages.ebay.com/link/?nav=item.view&...ID=EBAY-GB MY14 Kahn Converted Dynamic - Fuji White Ebony/Pimento Interior
MY15 Xenon Headlight Conversion

MY17 RRS SVR - Estoril Blue Cirrus/Ebony 🪣💺’s

Landiroamer wrote:

What happens after 2012, is it hard luck?

Joao

It is simply a British way of asking, "Is there an armrest available for cars later than 2012."

hehehe

ok, i got it now!

my english is not perfect and there own ways of saying certain phrases and expressions and who do not speak the same language ... it's hard to understand!