Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Maintenance & Modifications > Changing sidelights with light covers installed
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
chrisuk



Member Since: 22 Feb 2010
Location: Liverpool
Posts: 166

England 2007 Freelander 2 TD4 HSE Manual Tambora Flame
Changing sidelights with light covers installed

Hi guys,

Am I right in thinking that to replace my sidelight bulbs (on a 2007 FL2 HSE), I need to remove the headlight covers first, then the lamp unit, then change the bulb via the back of the unit ?

I'm hoping not as it seems like a big hassle just to change a bulb Sad

Thanks

Chris

Post #158715 25th Oct 2012 5:59 pm
View user's profile Send private message View poster's gallery Reply with quote
BossBob



Member Since: 30 Sep 2010
Location: Bristol
Posts: 1260

England 2007 Freelander 2 TD4 GS Manual Baltic Blue

No head light covers on my '07GS.
Undo the two 10mm bolts that hold the light in place. Lift the plastic lever (carefully) at the back of the headlight unit and slide the unit out of the front of the car a bit. Then you'll be able to disconnect the multi plug and take the light all the way out. You've now got access to all the bulbs via rubber covers. Replacement is the reverse except the light unit should snap into place.
You need to be careful with the plastic lever, its joined to a fairly fragile plastic rod that tends to snap and it's brittle in cold weather.

Post #158717 25th Oct 2012 6:12 pm
View user's profile Send private message View poster's gallery Reply with quote
chrisuk



Member Since: 22 Feb 2010
Location: Liverpool
Posts: 166

England 2007 Freelander 2 TD4 HSE Manual Tambora Flame

Cheers Bob.

I wouldn't be able to pull the unit out without removing the light covers which are secured into the bodywork......

Post #158734 25th Oct 2012 9:28 pm
View user's profile Send private message View poster's gallery Reply with quote
chrisuk



Member Since: 22 Feb 2010
Location: Liverpool
Posts: 166

England 2007 Freelander 2 TD4 HSE Manual Tambora Flame

Can anyone else confirm ?

There must have been someone who has changed thier bulbs on a FL2 with headlong covers installed ?

Cheers

Chris

Post #158855 26th Oct 2012 10:18 pm
View user's profile Send private message View poster's gallery Reply with quote
toeknee



Member Since: 14 Feb 2009
Location: out and about
Posts: 1509

United Kingdom 2007 Freelander 2 TD4 SE Manual Sumatra Black

You have to remove the light guards to fit new bulbs, it's a two minute job, think it either a 4or 5mm Allen key and a Phillips screwdriver then just remove the lights as BossBob

Post #158857 26th Oct 2012 10:29 pm
View user's profile Send private message View poster's gallery Reply with quote
Andy131



Member Since: 10 Dec 2009
Location: Manchester
Posts: 2161

United Kingdom 

If you could manage to replace the bulbs without removing the headlights you would be doing it blind.
There have been many instances where people have fitted new bulbs and the alignment is way out - purely by not seating the bulbs correctly, and this was after taking the headlights out.

It's a 10 minute job, including taking off the light guards and brackets. Tangiers Orange - gone, missing her
Replaced by Ewok what a mistake - now a happy Disco Sport owner

Post #158862 26th Oct 2012 11:33 pm
View user's profile Send private message View poster's gallery Reply with quote
chrisuk



Member Since: 22 Feb 2010
Location: Liverpool
Posts: 166

England 2007 Freelander 2 TD4 HSE Manual Tambora Flame

Thats I needed to heat guys, thanks.

I bought the car with the covers on, so will need to find out how to remove them !

Thanks again.

Chris

Post #158870 27th Oct 2012 8:55 am
View user's profile Send private message View poster's gallery Reply with quote
chrisuk



Member Since: 22 Feb 2010
Location: Liverpool
Posts: 166

England 2007 Freelander 2 TD4 HSE Manual Tambora Flame

All done - took about half an hour.

Just for reference, light covers come off with an Allen key & the bracket with a possie driver.

Light then slides out & bulb is changes over in mins.

Thanks for the tips chaps, if anyone is interested, I'll post some pics when it goes dark

Post #158886 27th Oct 2012 1:22 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site