Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > In Car Electronics > Where/how can I channel wires through bulkhead?
Post Reply  Down to end
Page 2 of 3 <123>
Print this entire topic · 
FL2go



Member Since: 08 Jun 2012
Location: QLD Sunshine Coast
Posts: 35

Australia 2007 Freelander 2 TD4 SE Auto Alaska White

This is all real good info, Guys. I'm just about to run some 12V to my Ham rig and was scratching my head about where to breach the bulkhead.

Cheers 2007 FL2 TD4 SE Auto, Alaska White with Black Leather, Cooper A/T3 tyres.

Post #153238 2nd Sep 2012 5:30 am
View user's profile Send private message View poster's gallery Reply with quote
FL2go



Member Since: 08 Jun 2012
Location: QLD Sunshine Coast
Posts: 35

Australia 2007 Freelander 2 TD4 SE Auto Alaska White

Guys, my Ham install has gone well up to the point of running cable through the bulkhead.

The route proposed by IRSnuff and pictured by johnny_22_83 does not exist on my car. When you remove the plastic cover on the L/H/side of the engine bay (looking from the front), the power brake reservoir takes up most of the hole and there is no cable entry/gtommet anywhere in sight. Maybe this is only relevant to L/H D vehicles?

Mudslinger's idea about removing the glove box sounded OK too, but having removed the GB, I can't see any way to get cable through. Could you be more specific about where to look for a grommet behind the GB?

Any and all suggestions welcome at this point as I've reached a dead end.

Cheers Sad 2007 FL2 TD4 SE Auto, Alaska White with Black Leather, Cooper A/T3 tyres.

Post #153658 5th Sep 2012 4:13 am
View user's profile Send private message View poster's gallery Reply with quote
FL2go



Member Since: 08 Jun 2012
Location: QLD Sunshine Coast
Posts: 35

Australia 2007 Freelander 2 TD4 SE Auto Alaska White

Problem Solved! Thanks to a post about three years old, I followed the bonnet release cable through the bulkhead and with coat hanger wire, pushed through into the engine bay. Only problem is, you have to remove the battery and battery tray to retrieve the cable and 80AH batteries are heavy as! Will post some pics shortly and thanks again to all those who came forward with advice.

Cheers 2007 FL2 TD4 SE Auto, Alaska White with Black Leather, Cooper A/T3 tyres.

Post #153818 6th Sep 2012 8:17 am
View user's profile Send private message View poster's gallery Reply with quote
vu2cpl



Member Since: 27 Dec 2011
Location: Bangalore
Posts: 5

India 2011 Freelander 2 TD4 SE Auto Fuji White

Hi

I have almost finished the installation. Pictures are being uploaded to gallery.

For power, I have ordered OEM connector of trailer power. Once I get it, I will be finishing the wiring.

Radio is an FT8900, Ant is a 1/4 wave whip. ( I cant put any longer antennas due to restriction of parking space height).
Front panel is mounted with the help of YSKxx00 kit with a lido mount onto passenger sear bolt. Speaker wire is run to the front, but I feel after taking off the fiber cubby hole cover at the boot, the audio level is usable in most conditions. If its inadequate, I can plug the cable into a X-mini speaker kept in the front cup holder Smile

Hope this helps someone planning an installation. Any suggestions, better mounting options are welcome.

regards

Manoj


Last edited by vu2cpl on 24th Sep 2012 1:58 am. Edited 1 time in total

Post #155492 23rd Sep 2012 1:01 pm
View user's profile Send private message View poster's gallery Reply with quote
FL2go



Member Since: 08 Jun 2012
Location: QLD Sunshine Coast
Posts: 35

Australia 2007 Freelander 2 TD4 SE Auto Alaska White

This install looks really neat, Manoj. I've just about finished mine, just a bit of tidying up to do. I bolted my radio to the underside of the spare wheel cover, rather than drill holes through the floor, but your way does look a lot more secure. My ant is a dual band 2/70 mounted exactlyu as yours, but I have to remove the ant to put the car in the garage. My remote front panel is fitted into the cubby along with a GPA and battery monitor. I'll post some pics very shortly and we can compare notes.

Cheers and thanks for p[osting your pics,

Laurie 2007 FL2 TD4 SE Auto, Alaska White with Black Leather, Cooper A/T3 tyres.

Post #155559 23rd Sep 2012 11:49 pm
View user's profile Send private message View poster's gallery Reply with quote
vu2cpl



Member Since: 27 Dec 2011
Location: Bangalore
Posts: 5

India 2011 Freelander 2 TD4 SE Auto Fuji White

Hi Laurie,

Thanks. We shall wait for the pictures. Please note I have not drilled any holes on the floor. I have just used two bolts that are already there ( probably to mount the wiring harness and canbus controller for trailer). All i had to do was, fabricate an "L" clamp from a furniture accessory so that my mounting bracket could be securely attached to these two bolts.
A better way is to have a 6" * 6" plate, bend it at 2", use two bolts on surface and then third one which is used for securing the fibre cover. The mobile mounting bracket can be made to attach to this plate with rivets. Will take that up as my next weekend project Smile

I have used this setup for past few days extensively and so far no hiccups, although I am not happy with the dc chord dangling from the aux power socket.

Post #155562 24th Sep 2012 2:07 am
View user's profile Send private message View poster's gallery Reply with quote
FL2go



Member Since: 08 Jun 2012
Location: QLD Sunshine Coast
Posts: 35

Australia 2007 Freelander 2 TD4 SE Auto Alaska White

Photos of FT857 Amateur Transceiver now in my gallery, albeit out of order. I will rearrange them as soon as I find out how and provide some notes on the install which may be of help to anyone else brave/crazy enough to try to do it this way!!


Cheers,

Laurie 2007 FL2 TD4 SE Auto, Alaska White with Black Leather, Cooper A/T3 tyres.

Post #155572 24th Sep 2012 8:16 am
View user's profile Send private message View poster's gallery Reply with quote
Prisoner359



Member Since: 17 Aug 2012
Location: Stourbridge
Posts: 194

United Kingdom 2007 Freelander 2 TD4 SE Auto Tonga Green

Useful link for installing radios in vehicles: -

http://www.fcs.org.uk/my%20files/mpt1362.pdf

Section 5.2.72. on page 27 deals with providing a supply for transceivers. Discovery 4 HSE - Aintree Green
Freelander 2 TD4 SE Automatic - Tonga Green
Defender XS - Tonga Green - Gone Now
Freelander 1 Td4 ES Manual - Epsom Green - Gone Now *
Freelander 1 Td4 Kalahari SE - Epsom Green - Gone Now
Freelander 1 XEi - Epsom Green - Gone Now

www.greenlandrover.uk

Post #155599 24th Sep 2012 3:39 pm
View user's profile Send private message View poster's gallery Reply with quote
vu2cpl



Member Since: 27 Dec 2011
Location: Bangalore
Posts: 5

India 2011 Freelander 2 TD4 SE Auto Fuji White

Thanks Laurie for the pictures... and thanks to prisoner359 for the details.. will go through the pdf.

regards

Manoj

Post #155600 24th Sep 2012 3:44 pm
View user's profile Send private message View poster's gallery Reply with quote
FL2go



Member Since: 08 Jun 2012
Location: QLD Sunshine Coast
Posts: 35

Australia 2007 Freelander 2 TD4 SE Auto Alaska White

Thanks, Prisoner359, thatt's all good stuff. 2007 FL2 TD4 SE Auto, Alaska White with Black Leather, Cooper A/T3 tyres.

Post #155649 24th Sep 2012 11:11 pm
View user's profile Send private message View poster's gallery Reply with quote
Dave



Member Since: 04 Jul 2007
Location: Somewhere Near You
Posts: 2666

Scotland 2012 Freelander 2 SD4 HSE Auto Indus Silver

FL2go wrote:
Photos of FT857 Amateur Transceiver now in my gallery, albeit out of order. I will rearrange them as soon as I find out how and provide some notes on the install which may be of help to anyone else brave/crazy enough to try to do it this way!!


Cheers,

Laurie


Where is the HF antenna or are you not using HF Question ______________________
2011 Full Fat RR 4.4 TDV8
2012 FL2 SD4 Auto HSE
2013 Kawasaki Versys 650

Post #155659 25th Sep 2012 6:40 am
View user's profile Send private message View poster's gallery Reply with quote
vu2cpl



Member Since: 27 Dec 2011
Location: Bangalore
Posts: 5

India 2011 Freelander 2 TD4 SE Auto Fuji White

Hi Dave,

In my case,

VHF was part1. Part2 - HF installation follows... Smile . Don't have an hf antenna. Will do that as soon as I get one. For the present radio 8900, antenna which covers 10m/6m/2m/70cm is available. But not very productive as 10 & 6 m are sporadic. Also its too much of inconvenience to remove/ tilt antenna before parking. I am moving to a new place where I have ample space and no restriction on antenna height. Also I will have to change my present radio to an IC706/FT857/IC7000 etc...looking at options.

Post #155660 25th Sep 2012 6:53 am
View user's profile Send private message View poster's gallery Reply with quote
FL2go



Member Since: 08 Jun 2012
Location: QLD Sunshine Coast
Posts: 35

Australia 2007 Freelander 2 TD4 SE Auto Alaska White

As per Manoj, 2m/70cm stage one, HF to come later. Currently thinking of stringing up a quick counterpoise ant along the fence, dragging the coax into the garage, power up the rig from mains supply and sit in the car for some HF QSOs. I'm going to have to come up with some sort of ant tuner before I can do that though.

Cheers,

laurie 2007 FL2 TD4 SE Auto, Alaska White with Black Leather, Cooper A/T3 tyres.

Post #155708 25th Sep 2012 11:11 pm
View user's profile Send private message View poster's gallery Reply with quote
Dave



Member Since: 04 Jul 2007
Location: Somewhere Near You
Posts: 2666

Scotland 2012 Freelander 2 SD4 HSE Auto Indus Silver

10m was open last weekend here, hope to catch you on air someday Thumbs Up ______________________
2011 Full Fat RR 4.4 TDV8
2012 FL2 SD4 Auto HSE
2013 Kawasaki Versys 650

Post #155716 26th Sep 2012 6:56 am
View user's profile Send private message View poster's gallery Reply with quote
FL2go



Member Since: 08 Jun 2012
Location: QLD Sunshine Coast
Posts: 35

Australia 2007 Freelander 2 TD4 SE Auto Alaska White

You never know your luck, Dave.

Cheers,

Laurie 2007 FL2 TD4 SE Auto, Alaska White with Black Leather, Cooper A/T3 tyres.

Post #155907 29th Sep 2012 4:17 am
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 2 of 3 <123>
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site