Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Technical > FL2 Front Parking Sensors
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
athelstan



Member Since: 03 Nov 2009
Location: Reality
Posts: 2657

FL2 Front Parking Sensors

Her Ladyship's MY 2010 does not have front parking sensors fitted (it has the rear PDC.) Soon a MY2011 facelift front bumper will be fitted. This new front bumper has PDC fitted.

Question 1: Does the front PDC simply "plug and go" into the existing Cambus, or will it require additional electrical parts to be installed to get them working properly Question

Question 2: And, will the ECU need reprogramming to acknowledge the installation of the front PDC Question

Thanks

Post #114492 23rd Sep 2011 12:29 pm
View user's profile Send private message View poster's gallery Reply with quote
EYorkshire



Member Since: 18 Nov 2010
Location: (!)
Posts: 4392

All I can do is point you in this direction and pray to whoever you fancy that you understand it Confused

http://www.freel2.com/forum/topic7743.html?highlight=front+sensor

Post #114493 23rd Sep 2011 12:53 pm
View user's profile Send private message View poster's gallery Reply with quote
athelstan



Member Since: 03 Nov 2009
Location: Reality
Posts: 2657

EY I've just read through that whole thread and that Dunroof is a better man than I re retro install. Phew, I think I'll just leave them unconnected.

And I didn't realise that you have to switch them on/off every time you seek to use them - logical I suppose but I'm glad I never specified them when I ordered the car for her Ladyship.

Post #114507 23rd Sep 2011 2:47 pm
View user's profile Send private message View poster's gallery Reply with quote
Calcul@tor



Member Since: 18 Aug 2011
Location: Middle England
Posts: 179

England 2008 Freelander 2 TD4 XS Manual Zermatt Silver

I think they're a bit smarter than needing to be switched on and off. Certainly seem to be activated when the rear ones are (maybe when reverse selected?).

Wife's has them and they seem to work when needed, but I haven't driven it enough to be more exact than that yet!

Post #114509 23rd Sep 2011 3:17 pm
View user's profile Send private message View poster's gallery Reply with quote
athelstan



Member Since: 03 Nov 2009
Location: Reality
Posts: 2657

Her Ladyship's FL2 has rear PDC fitted and is logically activated when you select reverse.

She does not have the centre dash control panel front PDC on/off switch installed so that's the first barrier and I don't see her having the patience to keep switching that button on and off - she'd get very irritated with that and would probably end up bashing to pieces in rage with the beeps when behind the car in front. Rolling Eyes

Post #114514 23rd Sep 2011 4:23 pm
View user's profile Send private message View poster's gallery Reply with quote
Captain Worm



Member Since: 12 Sep 2010
Location: Solihull
Posts: 969

United Kingdom 2007 Freelander 2 TD4 SE Auto Narvik Black

Fronts are activated when you put it in reverse, but you can turn them on yourself if you need them.

I found this to be a bit counter intuative to begin with as I was used to BM's who has them active all the time at low speeds, however now that I'm used to them I dont mind it / quite like it Thumbs Up Freelander 2 TD4 Auto, SE, Narvik Black, Alpaca full leather, Rear Headrest Entertainment System, 6 CD, 18 HSE Wheels, Privicy tints

Post #114528 23rd Sep 2011 7:18 pm
View user's profile Send private message View poster's gallery Reply with quote
Past master



Member Since: 30 Jun 2010
Location: Isle of Ely
Posts: 2710

United Kingdom 

The dash switch seems to be much misunderstood - certainly by the salesman who sold me the car. On my 2007 GS the front AND back sensors come on EITHER when you engage reverse gear OR when you flick the switch. They go off either when you exceed a certain speed (about 10mph) or when you flick the switch. Simple. Confused

Post #114722 25th Sep 2011 5:24 pm
View user's profile Send private message View poster's gallery Reply with quote
wizking



Member Since: 18 Mar 2010
Location: Around
Posts: 1848

England 2013 Freelander 2 SD4 XS Auto Indus Silver

Past master wrote:
The dash switch seems to be much misunderstood - certainly by the salesman who sold me the car. On my 2007 GS the front AND back sensors come on EITHER when you engage reverse gear OR when you flick the switch. They go off either when you exceed a certain speed (about 10mph) or when you flick the switch. Simple. Confused


Yep, thats how mine work too.

Post #114741 25th Sep 2011 7:36 pm
View user's profile Send private message View poster's gallery Reply with quote
Calcul@tor



Member Since: 18 Aug 2011
Location: Middle England
Posts: 179

England 2008 Freelander 2 TD4 XS Manual Zermatt Silver

Captain Worm wrote:
I found this to be a bit counter intuative to begin with as I was used to BM's who has them active all the time at low speeds
I think the LR way has advantages - not least of which is that they don't beep in traffic jams, if you get a bit close to the car in front.

Post #114777 26th Sep 2011 10:51 am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site