Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > In Car Electronics > XTRONS PA77DLRPL
Post Reply  Down to end
Page 9 of 16 <123 ... 8910 ... 141516>
Print this entire topic · 
MCJ



Member Since: 03 Nov 2016
Location: Nelspruit
Posts: 49

South Africa 2011 Freelander 2 SD4 HSE Auto Fuji White

Thumbs Up FOREVER LEARNING

Post #364817 27th Jan 2019 10:26 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
arcturus28



Member Since: 21 Nov 2018
Location: West Midlands
Posts: 22

2007 Freelander 2 TD4 SE Auto Narvik Black

Does anyone know the power draw of these units? Wondering how long it can be used while parked before it puts the battery at risk.

Post #366267 12th Feb 2019 3:48 pm
View user's profile Send private message View poster's gallery Reply with quote
DaiKa



Member Since: 27 Mar 2019
Location: Santa Ana
Posts: 3

United States 2008 LR2 i6 SE Auto Tambora Flame

Hi guys, Question for anyone who already has the xtrons unit.
What's the best way to remove the breakout box that snaps into the coin holder? I just got mine and test fitted the thing and don't want to break anything prying it out.
Thanks!

Post #369161 27th Mar 2019 8:35 pm
View user's profile Send private message View poster's gallery Reply with quote
andyk159



Member Since: 19 Nov 2014
Location: Skegby
Posts: 368

United Kingdom 2010 Freelander 2 TD4 HSE Auto Stornoway Grey

Push a thin blade down back of button panel to release the two clips holding it. Be gentle though. There's rwo hooks about 15mm in from edge. Andy
Freelander2 HSE (59 Plate, MY10 spec)

Post #369165 27th Mar 2019 8:57 pm
View user's profile Send private message View poster's gallery Reply with quote
DaiKa



Member Since: 27 Mar 2019
Location: Santa Ana
Posts: 3

United States 2008 LR2 i6 SE Auto Tambora Flame

Thank you my man!

DaiKa wrote:
Hi guys, Question for anyone who already has the xtrons unit.
What's the best way to remove the breakout box that snaps into the coin holder? I just got mine and test fitted the thing and don't want to break anything prying it out.
Thanks!

Post #369178 28th Mar 2019 12:03 am
View user's profile Send private message View poster's gallery Reply with quote
Gururek



Member Since: 17 Jun 2019
Location: Brisbane
Posts: 2

Australia 

Hi, hope someone can help with this.
I just installed the new PA79DLRIPL into my car which went fairly smoothly, however I'm having some issues with it.
Like others in this thread, I am unable to get the AUX bypass working, currently the sound is not going through to the speakers from the Xtrons unit. I also noticed that the rear AUX input is now also not working either, which I'm hoping is due to the adaptor that is trying to bypass it?
Also my GPS signal is basically useless in this thing, is there something I can do to improve it? It takes a while to connect to any satellite and even once it does, the connections are poor based on the GPS status screen in the settings and the speed/location data is inaccurate. I've attached the antenna to top of the middle speaker grill (no speaker installed there) so it's as close to the top as can be without being exposed. Is there a location setting I need to change or is it just a bad antenna?
Thanks for any help!

Post #373666 17th Jun 2019 12:51 am
View user's profile Send private message View poster's gallery Reply with quote
andyk159



Member Since: 19 Nov 2014
Location: Skegby
Posts: 368

United Kingdom 2010 Freelander 2 TD4 HSE Auto Stornoway Grey

With my unit the sound from xtrons unit comes through aux input on car radio through the main connectors that put the unit between car and head unit. My aux input socket still works ok as well. I would check for loose or poor connections on the main connectors.
As for GPS, mine is ok. I have put sensor at bottom left passenger side of windscreen, avoiding heated screen element area. Andy
Freelander2 HSE (59 Plate, MY10 spec)

Post #373676 17th Jun 2019 10:03 am
View user's profile Send private message View poster's gallery Reply with quote
MrC



Member Since: 12 Dec 2018
Location: Northumberland
Posts: 5

United Kingdom 2012 Freelander 2 TD4 XS Auto Alaska White

Make sure all your connections are fully seated. When I first plugged mine in I was only getting audio out of one speaker but fixed it after redoing the connections.

I also have my GPS and TPMS antennas in the empty middle speaker and they are both working fine.

Post #373735 18th Jun 2019 1:28 pm
View user's profile Send private message View poster's gallery Reply with quote
lloydt69



Member Since: 14 Jun 2019
Location: Surrey
Posts: 1

United Kingdom 

andyk159 wrote:
With my unit the sound from xtrons unit comes through aux input on car radio through the main connectors that put the unit between car and head unit. My aux input socket still works ok as well. I would check for loose or poor connections on the main connectors.
As for GPS, mine is ok. I have put sensor at bottom left passenger side of windscreen, avoiding heated screen element area.


Is it possible to install the xtrons in my freelander hse?

Post #373936 22nd Jun 2019 9:27 pm
View user's profile Send private message View poster's gallery Reply with quote
andyk159



Member Since: 19 Nov 2014
Location: Skegby
Posts: 368

United Kingdom 2010 Freelander 2 TD4 HSE Auto Stornoway Grey

Mine is a MY10 hse so dont see why not. You might have issues with newer models with updated dash systems.

You will also need a MOST shunt for fibre optics to keep systems such as parking sensors working when you remove sat nav screen. Andy
Freelander2 HSE (59 Plate, MY10 spec)

Post #373937 22nd Jun 2019 9:46 pm
View user's profile Send private message View poster's gallery Reply with quote
arcturus28



Member Since: 21 Nov 2018
Location: West Midlands
Posts: 22

2007 Freelander 2 TD4 SE Auto Narvik Black

Following this thread with great interest. Will get one of these soon- hopefully Xtrons will release an Android 9 head unit with 4gb RAM.

Has anyone found a way around the need to use the radio's aux input to get sound from the unit to the car speakers?

Post #374098 26th Jun 2019 12:04 pm
View user's profile Send private message View poster's gallery Reply with quote
Germplus1



Member Since: 19 Jul 2019
Location: Hampshire
Posts: 117

United Kingdom 2008 Freelander 2 TD4 SE Auto Zermatt Silver
Hello

ebear wrote:
Hello All,

Sorry for the late message. The LR019014 came later then expected. I removed the orignal navi display and connected the LR019014. Now everthing works perfect.
The small speaker which comes with the Xtrons I disconnected. Main reason was that all adio goes also trought this small speaker and gives at an higher volume a lot of noise. Without this speaker everything works perfect.

With solving these small issues I really happy with the Xtrons android.

Thanks to everyone for the support.

Best regards,

Eric



Hello,

I am following this thread as I am in the same situation, I ordered the Most Adopter (LR019014) which arrived today.
but I cannot find where to plug it, it wouldnt fit any of the fibre cables, can you please help me and show me where to connect the LR019014 ?

Thank you

Post #375345 19th Jul 2019 9:13 am
View user's profile Send private message View poster's gallery Reply with quote
petero



Member Since: 27 Jul 2017
Location: Tamworth, Staffs
Posts: 49

United Kingdom 2007 Freelander 2 TD4 HSE Manual Sumatra Black

The MOST adapter has a little rubber or plastic cap protecting the ends of the fibres which needs to be removed first. It took me while to figure this out but it should plug in ok once it is removed.

Post #375405 19th Jul 2019 8:06 pm
View user's profile Send private message View poster's gallery Reply with quote
petero



Member Since: 27 Jul 2017
Location: Tamworth, Staffs
Posts: 49

United Kingdom 2007 Freelander 2 TD4 HSE Manual Sumatra Black

If you look back a couple of pages in this thread I posted a picture of the most shunt with the cover still fitted next to the connector which previously plugged into the sat nav unit. remove the cover and plug the shunt onto the connector and it should work fine. Look here: https://www.freel2.com/forum/topic30709-90.html

Post #375407 19th Jul 2019 8:27 pm
View user's profile Send private message View poster's gallery Reply with quote
Germplus1



Member Since: 19 Jul 2019
Location: Hampshire
Posts: 117

United Kingdom 2008 Freelander 2 TD4 SE Auto Zermatt Silver

petero wrote:
The MOST adapter has a little rubber or plastic cap protecting the ends of the fibres which needs to be removed first. It took me while to figure this out but it should plug in ok once it is removed.


Thank you. All sorted now.

Post #375498 20th Jul 2019 9:17 pm
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 9 of 16 <123 ... 8910 ... 141516>
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site