Hi All.
I have a problem with the interior lights (MY13 TD4). When any of the doors are opened the interior lights come on and off as normal. However no light when I manually move any of the switches to the on position.
I figured it may be a fuse problem but looking through my owners manual I can't find any ref to interior lighting.
Any tips?
Cheers

https://topix.landrover.jlrext.com/topix/c...f31298c661!!1!

I think that you will find that the on/off switch may have a different supply to that of the (dimmable) supply which works when 'door ajar' is detected. Check the fuse associated with interior lights.

Not sure of how many interior lights that your car is equipped with. Do you have footwell, puddle, map lights? FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 76k+ miles) (MY2015)

Fuse Positions
http://knigaproavto.ru/shemy/en/land-rover...62015.html FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 76k+ miles) (MY2015)

Thanks Ian
The supplies are different, there is voltage on the door supply but not the other. I have the basic model TD4 with no puddle or footwell lights, in fact no wiring either.
The diagrams show an Interior light for 2012 on F17 but no fuse for interior lighting in the 2013 list. Clearly the lights must be fed from somewhere, I just can't figure out where.
Cheers

Not to forget that after some time, about 5 minutes, the interior lights will not turn on no matter how much you move the switch back & forth. It's part of the "energy management" so you don't get a flat battery.

Keep a torch & an AM portable radio in the car! Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

Hi Lightwater. Yeah, knew that. There is just no volts at any time getting to the switch and I can't figure out what fuse.
There is no entry for Interior Lighting for 2013 onwards in the owners manual.
I don't really want to pull out every fuse to inspect if it's blown. Besides, everything else seems to be working OK.
db