I had a search for this but no results. Can anyone point out a way in to the interior of the Freelander II from the engine bay, without having to make a hole.

Follow the path of one of the looms would seem to be an option.

If you explained why it may make more sense. FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

My leccy chap managed to run two cables through via the bonnet release lever cable,
Dave DAVE.
I.A.M. F1rst Driver.
Gone 2003 Discovery TD5 Auto,
Gone 1986 Defender 90 Station Wagon
Gone 1984 Range Rover 3.5 Vogue Manual.
Gone 1970 Series 11A/3 SWB 3.5 V8 Hybrid
Gone 1964 Series 11A LWB Van
Gone 1966 Series 11A SWB Van
Gone 1964 Series 11A LWB Station Wagon,

Ive used the bonnet release cable grommet as well for 2 wires.  Landrover - turning owners into mechanics since 1948

2014 Orkney grey Freelander SD4 GS.
2004 Zambezi silver Discovery 2 Td5 (Gone)
1963 Surf blue Morris Mini Minor Super de Luxe (my little toy)

Thanks for all your replies. The reasoning behind it is that I'm going to try installing front parking sensors, as I can't figure out the bonnet length, even after 4 yrs use

Useful feature, what kit are you fitting? Landrover - turning owners into mechanics since 1948

2014 Orkney grey Freelander SD4 GS.
2004 Zambezi silver Discovery 2 Td5 (Gone)
1963 Surf blue Morris Mini Minor Super de Luxe (my little toy)

Cheap chinese kit until I see if it'll work plus it's the colour I need

Culagh wrote:

Thanks for all your replies. The reasoning behind it is that I'm going to try installing front parking sensors, as I can't figure out the bonnet length, even after 4 yrs use

I'm lucky mine are OEM - wouldn't know how to park mine without them  No Longer the owner of a 2013MY Fuji White GS

"Fiat Lux" a philosophy not a car

Culagh wrote:

Thanks for all your replies. The reasoning behind it is that I'm going to try installing front parking sensors, as I can't figure out the bonnet length, even after 4 yrs use

You need the early model, comes with a man and a red flag.  FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

Culagh wrote:

The reasoning behind it is that I'm going to try installing front parking sensors

Hi

I also fed 3 wires through using the bonnet pull grommet but it is not easy.

I removed the glove compartment inside and the airbox with all its pipes, battery, battery box and a fair bit of skin from my knuckles to get them through. Was worth it as I needed the cabling but wouldn't relish doing it again. The might be an easier route but I couldn't find it.

The sensors will make parking so much easier as the front does just drop away 😀

Good luck  If your going through hell, keep going!

Wrapper of rear pillars 😀

Culagh wrote:

Cheap chinese kit until I see if it'll work plus it's the colour I need

Try here, they have several colours


https://www.ebay.co.uk/itm/Car-Parking-4-S...0005.m1851