Hi I have a 2008 Freelander which as landrover fit tower and electrics which was two 7 pin sockets for which I have put in to one 13 pin socket.
But it will not run LED light on my tail board or caravan. I have a Dedicated electric kit from ECS electronics which will sort out my LEDs as I have plugged it in to try it . But I need to connect pin 10 for the Fridge +ve. pin 10 is connect now but when I unplug the landrover fit it will disconnect it. I know where the relay which in the car now gets the power from within the socket of the cars wiring loom but I do not know where it gets its trigger power for the relay from. As any one done this. I know it must be one of the wires with in the socket but do not know which one. As it is now the trigger wire from the relay goes in to the black box.
Thank you for look at this any help will be good thank you Mark