Can anyone tell if this harness behind the blanking cover is for fitting the front fog and driving light kit ? Found it on my 13 reg GS when the plastic cover came lose were the fog lights would fit .

It's for the factory fog lamps MY14 Kahn Converted Dynamic - Fuji White Ebony/Pimento Interior
MY15 Xenon Headlight Conversion

MY17 RRS SVR - Estoril Blue Cirrus/Ebony 🪣💺’s

Thankyou for the reply ,a part from the lights and bezels do you know what else I would need to get working ?

I think you may need to enable the CCF file also.

I have fitted factory fogs to 6 Freelander 1s till date. Some cars needed a pair of relays and others a pair of fuses. The biggest pain was cutting the bumper neatly to enable the fog bezels to be located.

Normally the fog light harness is tucked away/clipped onto the front reinforcement bar wonder why yours has come adrift. MY14 Kahn Converted Dynamic - Fuji White Ebony/Pimento Interior
MY15 Xenon Headlight Conversion

MY17 RRS SVR - Estoril Blue Cirrus/Ebony 🪣💺’s

It had been taped to the front reinforcement bar by the look of the green tape around the harness and front bar ,most likely was a Monday morning car and who ever put the harness in place couldn't be bothered getting a clip after a week end on the ale